Hello,

nathans config do not work 100% and the fx_shockwave_taxi do not exist in the Shockwave 3D Redux version 1.2a!

I use my own config as followed:

gaugeXX=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light


[lights]
; X, Z, Y
light.0 = 3, 1.85, -65.90, -1.00, fx_shockwave_navred
light.1 = 3, 1.85, 65.90, -1.00, fx_shockwave_navgre
light.2 = 3, 0.78, -66.90, -1.00, cs130_nav_red_flash
light.3 = 3, 0.78, 66.90, -1.00, cs130_nav_gre_flash
light.4 = 3, -58.25, 0, -2.10, cs130_nav_whi_double
light.5 = 7, -58.25, 0, -2.10, cs130_nav_whi_flash_double
light.6 = 7, 11.75, 0, -15.55, cs130_nav_whi_flash
light.7 = 3, 11.75, 0, -15.55, fx_shockwave_navwhi
// Anti_Collision
light.8 = 6, 3.50, 8.30, -14.10, fx_shockwave_landing_light_narrow_down
light.9 = 6, 3.50,-8.30, -14.10, fx_shockwave_landing_light_narrow_down
light.10 = 1, 23.24, 0.00, -15.59, fx_shockwave_beaconb
light.11 = 1, 5.29, 0.00, -1.47, fx_shockwave_beacon
light.12 = 1, -48.59, 0.00, 21.70, fx_shockwave_beaconh
light.13 = 2, 5.29, 0.00, -1.47, fx_shockwave_strobe
// IR and Fuel Dump
//light.14 = 9, -16, 0, -10, cs130_ir
//light.15 = 10, -7, 0, 0, cs130_fdump
light.14 = 5, 2.76, -24.4, -3.5, fx_shockwave_landing_light
light.15 = 5, 2.76, 24.4, -3.5, fx_shockwave_landing_light
//Cabin
light.16 =4, 33.00, -1.75, -6.00, cs130_vcwt
light.17 =4, 33.00, 1.75, -6.00, cs130_vcwt
light.18 =4, 0.00, 0.00, -3.80, cs130_cabin

Regards
Michael