Saratoga wrote on Jul 14^th, 2013 at 3:58am:

Markoz wrote on Jul 12th, 2013 at 7:46am: AP_Roll_speed=4 AP_Roll_window=7 AP_Roll_controlstep=1500 This setting takes out the slight oscillation in the AP and it also rolls into turns a bit less aggressively. Ben

In the takeoff, climb and cruise phases of the flight, I don't see any difference between that setting and the one that comes in v1.2.
But using the above settings, and once I'm close to landing (about 2 miles from the runway), my 777 starts rocking left and right, getting worse as it gets closer to the runway, and most often ends with it crashing. Sometimes it's lucky and just bounces around on the grass beside the runway without crashing (because the main gear on one side contacts the ground first), but not very often.
If I switch back to the one that comes with v1.2, it comes in straight and level every time, even with a 20-30 knot crosswind. It also lands in the centre of the runway every time.
So I guess one uses the settings that gives the results. ;)