Post by Markoz on Oct 5th, 2013 at 12:26pm
The following is what can be found in the PDF file (I used print to PDF to create it) that can be got from the link above. I have no idea why it would give an error. If you want, I can email the PDF, in a ZIP file, to anyone who wants it (size is 168KB).
DOPPLER TUTORIAL:
1. Q: DOPPLER SYSTEM Quick Start tutorial.
A: 1. Switch Function Selector Switch on DOPPLER CONTROL UNIT (overhead) to ON position
2. Make sure:
- Control Switch (#1, P01, NAV CONTROLLER) is in OFF or STBY position (ref. Manual Part II,
p.52)
- Stage Selector (#9, P01, NAV CONTROLLER) is in middle position (ref. Manual Part II, p.52)
3. Set distance and course your need at A and B unit using Mileage Set Knobs (#6,#8) and Course
Selector (#11,#13)
4. Set Control Switch (#1) to MAN or AUTO position.
5. Set Stage Selector (#9) to A or B position.
6. Route will be shown on the map.
7. Put Autopilot Mode Selector to NAV position - aircraft will follow the route.
Note: If Control Switch is in MAN position, just one leg - A or B will appear on the map (depends on
Stage Selector position).
From: 707 Captain / Systems Programming (gauges) (QID 5968)
THE ABOVE IS FROM THE ORIGINAL KB #5968
This what KB #5968 says now:
Quote:
DOPPLER TUTORIAL:
1. Q: DOPPLER SYSTEM Quick Start tutorial.
A: 1. Switch Function Selector Switch on DOPPLER CONTROL UNIT (overhead) to ON position
2. Make sure:
- Control Switch (#1, P01, NAV CONTROLLER) is in OFF or STBY position (ref. Manual Part II,
p.52)
- Stage Selector (#9, P01, NAV CONTROLLER) is in middle position (ref. Manual Part II, p.52)
3. Set distance and course your need at A and B unit using Mileage Set Knobs (#6,#8) and Course
Selector (#11,#13)
4. Set Control Switch (#1) to MAN or AUTO position.
5. Set Stage Selector (#9) to A or B position.
6. Route will be shown on the map.
7. Put Autopilot Mode Selector to NAV position - aircraft will follow the route.
Note: If Control Switch is in MAN position, just one leg - A or B will appear on the map (depends on
Stage Selector position).
From: 707 Captain / Systems Programming (gauges) (QID 5968)
THE ABOVE IS FROM THE ORIGINAL KB #5968
This what KB #5968 says now:
Quote:
| Q: How can I use DOPPLER SYSTEM? A: Please see the Manual, Part II. From: 707 Captain / Systems Programming (gauges) (QID 5968) |