installed 737-200 base
             737-200 ext
             737-100 exp
the 737-100 shows, but there are no control surfaces working nor is there any sound.....tried search...sure it's there somewhere, but it would take me many hours i'm afraid....thanks...vic
never could figure how to get that "new" icon

If you are using Vista/Win7/Win8, make sure you install it using "run as administrator".

If the activation failed during installation, you might need to do a complete uninstall/reinstall as explained in KB #685.

Check-in to Your Profile > Product > Customer Support > Search KB or Submit New Ticket. Do a search for KB #685.

thanks markos..will try....

nope..didn't work ...said security warning....and when i bypased it the 737-100...just flew..no control.....should i open a ticket? maybe i installed them in the wrong order....i remember the 100 exterior worked by itself when that's all i had....

Install this one first:

737-200 (csp732_1000.exe)

The rest, the expansion models:

737-200 ADV (cse732_1100.exe)
737-100 (cse731_1500.exe)
737-200C/F (cse733_1000.exe)

can be done in any order you like.

If that doesn't fix it, then you will need to submit a ticket. :(

ok....ticket time again  :)......

"they" told me to load cxe731_1000, then cse731_1500, and i didn't have to load the 737 200 exterior....i did every thing asked and still no control over the 3 surfaces......is this all for nothing?...any ideas?...am i the only one?.....hope....vic

can't believe i got it working!.....i deleted all 737.....and rather than re-downloading the 737-100 ext in my account, i went way back to my original 737-100 ext., with the original order number and installed it...and that of course worked...then i installed the present 737-200 base pack...and now it works.....a miracle....happy camper...(although the 100 uses the default panel)

yancovitch wrote on Dec 19^th, 2012 at 11:59pm:

can't believe i got it working!.....i deleted all 737.....and rather than re-downloading the 737-100 ext in my account, i went way back to my original 737-100 ext., with the original order number and installed it...and that of course worked...then i installed the present 737-200 base pack...and now it works.....a miracle....happy camper...(although the 100 uses the default panel)

Yahoo!! Glad to hear you finally have it working! Enjoy.

As to the 737-100. It probably works like this for you:

1) Install original 737-100 Exterior Model (csx730_0100.exe)
2) Install 737-200 Base Pack upgrade (csp732_1000.exe or is it csu732_1000.exe)
3) Install 737-100 Expansion Model (cse731_1500.exe)

i'm kinda afraid to Install 737-100 Expansion Model (cse731_1500.exe) (which i guess should give me the new panel)
maybe i'll loose everything???
how confident are you  ;D ;D???

The difference between the first 737-100 (v0.1) and the new one (v1.5) is that the first one was done at a time when the 737-100 was going to be the Base Pack and not the 737-200 which is now the Base Pack. That means that the cse731_1500exe NEEDS the csp732_1000.exe to be installed so it can set the VC and gauges up correctly.

Here is a view of the way the VC in the 737-100 uses the gauges from the 737-200:

[VCockpit01]
size_mm=2048,2048
pixel_size=2048,2048
texture=$_01
background_color=0,0,0
gauge00=..\..\CS_B737-200\panel\Captain_Sim.x737.sound!main, 1,0,1,1, Captain_Sim\737\sound.ini
gauge01=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_001, 1026, 1536, 500,500
gauge02=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_001_ndl, 1529, 1606, 105,429
gauge03=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_005, 8, 8, 500,500
gauge04=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_006, 518, 8, 500,500
gauge05=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_007, 8, 518, 500,500
gauge06=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_008, 518, 518, 500,500
gauge07=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_009, 8, 1026, 500,500
gauge08=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_010, 518, 1026, 500,500
gauge09=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_011, 8, 1536, 500,500
gauge10=..\..\CS_B737-200\panel\Captain_Sim.x737.C09!C09_012, 518, 1536, 500,500
gauge11=..\..\CS_B737-200\panel\Captain_Sim.x737.C10!C10_009, 1026, 8, 500,500
gauge12=..\..\CS_B737-200\panel\Captain_Sim.x737.C10!C10_010, 1536, 8, 500,500
gauge13=..\..\CS_B737-200\panel\Captain_Sim.x737.C10!C10_011, 1026, 518, 500,500
gauge14=..\..\CS_B737-200\panel\Captain_Sim.x737.C10!C10_012, 1536, 518, 500,500
gauge15=..\..\CS_B737-200\panel\Captain_Sim.x737.C10!C10_013, 1026, 1026, 500,500
gauge16=..\..\CS_B737-200\panel\Captain_Sim.x737.C10!C10_014, 1536, 1026, 500,500
gauge17=..\..\CS_B737-200\panel\Captain_Sim.x737.O31!O31_001, 1660, 1536, 227,121

Notice that all the VC gauges are stored in the CS_B737-200\panel folder? I can't see how it would mess that up. So I am confident it will work.

Besides. You know what to do if it does mess it up. Install the 737-100 Exterior Model and then install the 737-200 Base pack Upgrade. ;)

thanks so much mark for you're infinite patience......it worked!!!...

yancovitch wrote on Dec 20^th, 2012 at 5:47pm:

thanks so much mark for you're infinite patience......it worked!!!...

Yay! I'm glad you've got it all working. Happy flights. ;)