To give an overview, here's the current list of items being considered as 'to fix' in the next SP. Means that naming them again doesn't make sense, they are already in the CS support system.


Quote:

System annunciator panel does not work. PDCS issues 1) The PDCS modes #4 GS, #5 RNG and #6 FUEL can't be accessed. 2) The PDCS computed values for CRZ are too low. 3) The PDCS does not drive the EPR and ASI bugs like stated in the manual2, page 78. 4) No mode entries possible when pressing the keys. 5) wrong EPR CRZ values, too low cruise speed for a 737, it may stall at that speed when flying high. 6) No light (before pressing), no action when ENGAGE is pressed. 7) Modes should be accessible like the other ones, e.g. LOAD (works) on #1. 8) Cruise speeds in ECON for a 737 should aim at some 0.75 to 0.79 I guess.The manual mode should allow for manual speed (Mach) entries higher than 0.616, up to the max possible cruise speed of the 737. The PDCS should then give the corresponding EPR values. 9) From the manual2, when pressing ENGAGE, the PDCS should: "5. ENGAGE KEY PRESS (with a flight mode selected) - • Drives the EPR and/or airspeed bugs to the displayed values • The key light extinguishes and the engaged mode is displayed on the flight mode annunciator" Default loaders do not attach to exits. Micro stutters on the gauges needles. Dome lights of the cockpits are misplaced. After landing autobrakes do not disarm. The power wents out after 10-15 minutes of use. I have problems with saved flight loading. The slats on the 737-200ADV should extend futher than the slats on the 737-200. PCDS crashes under certain conditions when entering data in to it. There is no touchdown smoke. The PCDS when set to T/O and after entering the OAT, the Engage button does not set the EPR gauges. Also EPR will not return to Auto when manually setting power using the button on each EPR. Blue valve position lights do not show valve in transit or switch/valve disagree. Master Caution and associated lamps do not light up except in test mode. Autopilot Disconnect Light does not illuminate on autopilot disconnect.

Note. You can view the current status of the list by going to Your Profile > Customer Support > Knowledge Base > 737 Captain 'On the list for the next SP'.