This XML gauge is for the CS 707-300 and expansions, FSX only.

Now in the Avsim library, search for:
V-One Gauge for B707-300 with Call-Outs

The sounds:

• 80 knots
  
• V1
  
• VR
  
• V2
  
• Gear Up
  
• Flaps Up
  
• Slats Retract
  

The gauge will calculate the correct v-speeds for gross weight and provide required trim units.
The v-speeds are adjusted for altitude and temperature.
Optimum FL and EPR are displayed based on current gross weight and are continually updated.
Clean speed (no flaps) is calculated as is Vref40 and Vref50.
Fuel, Gross Weight, OAT and CG are displayed.
KG, LB, °C and °F  can be toggled by a mouse click.
If the current gross weight has exceeded the max gross weight a 'red' warning of overloading is displayed.
The v-speeds will display 'red' when the aircraft's TOW has been exceeded based on altitude & temperature.
Elapsed flight time and fuel used can be reset at anytime by clicking on their displays.

The main gauge is a text display of:

• Vertical Speed
  
• Pitch
  
• EPR
  
• N1%
  
• Fuel Flow
  
• TAS
  
• TAT
  
  After flap selection, the following will display for Take-Off:
  
• Flaps selected
  
• Required Trim/Current Trim
  
• V1, Vr & V2

Both the main gauge and datacard can be toggled off and on via an icon.

http://i823.photobucket.com/albums/zz155/fsxpaul/FSX/707-300.jpg