Post by Markoz on Apr 28th, 2012 at 4:54am
Hi.
the modern panel dont work right
Use ACE to add the EICAS Gauges to your C-130's. You must to do this for each aircraft that you want to use them in and click on SAVE before moving to the next one.
If you are using FSX at the time of the change, you will still see the Classic panel, but the gauges will be black. The reason this happens is because the interior model and the panel.cfg are changed, but you won't see the EICAS until after you restart FSX. You can't change the model in use while FSX is running, because it holds onto the model that was first loaded into FSX and doesn't let it go until after it is exited. This does not apply to the exterior model, only the interior model. In other words you can add or remove the external fuel tanks and all you need to do is reload the C-130!
The engines die when that engines tank is empty whenever I go to full screen from window mode
I can switch from Windowed mode to Full Screen mode with some tanks being empty without it causing any engines to shut down. Maybe it has something to do with the position of Boost Pump Switches and Crossfeed Valves.
I have provided a screenshot of my Lower Overhead Panel with the Fuel Boost Pump Switches and Crossfeed Valve settings, and what has happened because of the way they are set.
Engine #1
Fuel Tank #1 is EMPTY. Fuel Boost Pump for Tank #1 is OFF. Crossfeed Valve for Engine #1 is OPEN. Engine #1 is running because fuel is being fed to it because the Crossfeed Valve is OPEN. The Low Pressure Warning Light is ON.
Engine #4
Fuel Tank #4 is EMPTY. Fuel Boost Pump for Tank #4 is OFF. Crossfeed Valve for Engine #4 is CLOSED. Engine #4 is NOT running because fuel is NOT being fed to it because the Crossfeed Valve is CLOSED. The Low Pressure Warning Light is OFF.
If I was to OPEN the Crossfeed Valve for engine #4, I could restart it and it would run fine.
Mark
the modern panel dont work right
Use ACE to add the EICAS Gauges to your C-130's. You must to do this for each aircraft that you want to use them in and click on SAVE before moving to the next one.
If you are using FSX at the time of the change, you will still see the Classic panel, but the gauges will be black. The reason this happens is because the interior model and the panel.cfg are changed, but you won't see the EICAS until after you restart FSX. You can't change the model in use while FSX is running, because it holds onto the model that was first loaded into FSX and doesn't let it go until after it is exited. This does not apply to the exterior model, only the interior model. In other words you can add or remove the external fuel tanks and all you need to do is reload the C-130!
The engines die when that engines tank is empty whenever I go to full screen from window mode
I can switch from Windowed mode to Full Screen mode with some tanks being empty without it causing any engines to shut down. Maybe it has something to do with the position of Boost Pump Switches and Crossfeed Valves.
I have provided a screenshot of my Lower Overhead Panel with the Fuel Boost Pump Switches and Crossfeed Valve settings, and what has happened because of the way they are set.
Engine #1
Fuel Tank #1 is EMPTY. Fuel Boost Pump for Tank #1 is OFF. Crossfeed Valve for Engine #1 is OPEN. Engine #1 is running because fuel is being fed to it because the Crossfeed Valve is OPEN. The Low Pressure Warning Light is ON.
Engine #4
Fuel Tank #4 is EMPTY. Fuel Boost Pump for Tank #4 is OFF. Crossfeed Valve for Engine #4 is CLOSED. Engine #4 is NOT running because fuel is NOT being fed to it because the Crossfeed Valve is CLOSED. The Low Pressure Warning Light is OFF.
If I was to OPEN the Crossfeed Valve for engine #4, I could restart it and it would run fine.
Mark