CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
737 Captain >> 737 Captain - General >> 737-200 SHockwave 3D lights Redux configuration https://www.captainsim.org/forum/csf.pl?num=1335244251 Message started by Oscar Ceballos on Apr 24^th, 2012 at 5:10am

Title: 737-200 SHockwave 3D lights Redux configuration
Post by Oscar Ceballos on Apr 24^th, 2012 at 5:10am

Hi every one, could anyone help me and post the 3d light redux configuration for 732 ,

thanks u so much,

best regards :)

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by Cthulhus on Apr 24^th, 2012 at 7:30am

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by gandy on Apr 24^th, 2012 at 12:04pm

these are just for the landing lights on the 737-200, they might be ok with the Cargo etc but i have not tested them

light.9 = 5, 8.0, 6.75, -3.49, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 8.0, -6.75, -3.49, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 5, 32.0, 0.0, -8.2, fx_Shockwave_landing_light // Shockwave light

Just paste the in the [LIGHTS] section, there is nothing to replace as the last stock light its listed as 8 and these add on after it.

I would not consider these the finial position of the lights but its pretty close to being aligned in the right spots.

Hope these help.

Paul

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by Kalo on Feb 11^th, 2013 at 7:28pm

thanks, works and looks great!

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by Aflex on Feb 11^th, 2013 at 11:49pm

From shockwaveproductions forum I have these:

CAPTAIN SIM 737-200 v1.0

[LIGHTS]
light.0 = 1, 5.00, -0.20, -7.20, fx_shockwave_beaconh_l
light.1 = 1, 3.10, -0.10, 6.60, fx_shockwave_beaconb_l
light.2 = 7, 33.60, -1.50, 3.50, cs737_vclightwhi
light.3 = 10, 33.40, 1.60, 3.30, cs737_vclightwhi
light.4 = 8, 2.00, -14, -1.00, cs737_vclightwhi
light.5 = 8, 2.00, 14, -1.00, cs737_vclightwhi
light.6 = 9, 33.00, 0.00, -5.00, cs737_ww
light.7 = 9, -6.87, 2.00, -4.50, cs737_ww
light.8 = 9, -6.87, -2.00, -4.50, cs737_ww
light.9 = 5, 7.20, -7.50, -3.30, fx_shockwave_landing_light_short // Left inboard landing light
light.10 = 5, 7.20, 7.50, -3.30, fx_shockwave_landing_light_short // Right inboard landing light
light.11 = 5, -14.60, -28.50, -3.00, fx_shockwave_landing_light_narrow // Left outboard landing light
light.12 = 5, -14.60, 28.70, -3.00, fx_shockwave_landing_light_narrow // Right outboard landing light
light.13 = 2, -21.65, -46.50, 0.10, fx_shockwave_strobe_2_nl // Left wingtip strobe
light.14 = 2, -21.75, 46.50, 0.10, fx_shockwave_strobe_2_nl // Right wingtip strobe
light.15 = 2, -54.20, 0.00, 4.40, fx_shockwave_strobe_3_nl // Rear strobe
light.16 = 3, -17.15, -46.65, 0.20, fx_shockwave_navred // Left navlight (red)
light.17 = 3, -17.35, 46.55, 0.20, fx_shockwave_navgre // Left navlight (green)

I didn't play a lot with them so I can't tell you if they are good or not. Worth a test. :)
rgds, Lex

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by N3su on Feb 14^th, 2013 at 5:38pm

Aflex wrote on Feb 11^th, 2013 at 11:49pm:

Thanks ur effort n for Sharing it,
i use this tweak since u shared it

Best regards
N3su

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by Kalo on Feb 19^th, 2013 at 9:17pm

Aflex wrote on Feb 11^th, 2013 at 11:49pm:

thanks ill give that a try, a lot more lights then the 3 I have so far!

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by Kalo on Feb 19^th, 2013 at 10:30pm

try this guys, I added a front gear taxi light and a left and right runway turnoff lights. I didn't like the 3dlights red strobe for the top and bottom of the fuselage, so I just used the default captain sim one (lights .0 and .1). Looks great now!:

[LIGHTS]
light.0 = 1, 5.00, -0.20, -7.20, fx_beaconb
light.1 = 1, 3.10, -0.10, 6.60, fx_beaconh
light.2 = 7, 33.60, -1.50, 3.50, cs737_vclightwhi
light.3 = 10, 33.40, 1.60, 3.30, cs737_vclightwhi
light.4 = 8, 2.00, -14, -1.00, cs737_vclightwhi
light.5 = 8, 2.00, 14, -1.00, cs737_vclightwhi
light.6 = 9, 33.00, 0.00, -5.00, cs737_ww
light.7 = 9, -6.87, 2.00, -4.50, cs737_ww
light.8 = 9, -6.87, -2.00, -4.50, cs737_ww
light.9 = 5, 7.20, -7.50, -3.30, fx_shockwave_landing_light_short // Left inboard landing light
light.10 = 5, 7.20, 7.50, -3.30, fx_shockwave_landing_light_short // Right inboard landing light
light.11 = 5, -14.60, -28.50, -3.00, fx_shockwave_landing_light_narrow // Left outboard landing light
light.12 = 5, -14.60, 28.70, -3.00, fx_shockwave_landing_light_narrow // Right outboard landing light
light.13 = 2, -21.65, -46.50, 0.10, fx_shockwave_strobe_2_nl // Left wingtip strobe
light.14 = 2, -21.75, 46.50, 0.10, fx_shockwave_strobe_2_nl // Right wingtip strobe
light.15 = 2, -54.20, 0.00, 4.40, fx_shockwave_strobe_3_nl // Rear strobe
light.16 = 5, 8.0, 6.75, -3.49, fx_Shockwave_landing_light_narrow // Shockwave light
light.17 = 5, 8.0, -6.75, -3.49, fx_Shockwave_landing_light_narrow // Shockwave light
light.18 = 5, 32.0, 0.0, -8.2, fx_Shockwave_landing_light

Title: Re: 737-200 SHockwave 3D lights Redux configuration
Post by Aflex on Feb 22^nd, 2013 at 5:44pm

Agree for the red (anti col) strobes. Will give this a try.
Thanks for sharing!
Lex