CAPTAIN SIM FORUM
General >> Hangar talks >> Pushback and more for all planes, at all airports
https://www.captainsim.org/forum/csf.pl?num=1328095285

Message started by CoolP on Feb 1st, 2012 at 11:21am

Title: Re: Pushback and more for all planes, at all airports
Post by Markoz on Aug 10th, 2012 at 2:19am

CoolP wrote on Aug 9th, 2012 at 2:39pm:

Markoz wrote on Aug 9th, 2012 at 7:44am:
Sure does. But that was after the darn aircraft raced away on me.

Hahaha.  ;D I had to laugh so hard, mainly because that is exactly what happened here at first. 'Geez, where is my plane going?!'.  ;D

Well, I've forced the thing (joystick) to centre and then it worked. But you can also disable the axes for the slew mode. FSX distinguishes different axes for the normal and slew mode, so this won't harm the normal operation.
Good thing is, once you've set your planes up, you save that gsx.cfg file and have your data set. We could also exchange those files if you like. Same as the GSX forum section over there allows.

Here's mine for the -ADV. Should fit the -200 too. I hope it works reasonably. I've deleted all checks on whether the door is opened or closed, except on the main door.

Code (][aircraft):

nosegear = 9.0
refueling = 1

[exit1]
pos = -1.65 7.84 -0.749533533002 5.0
code = 1

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
pos = -1.45 -10.51 -0.199316907472 -5.0
code = 0

[service1]
pos = 1.59 8.34 -0.758259736153 -7.0
code = 0

[service2]
flip = 4
code = 0

[cargo1]
pos = 1.89 4.4 -1.94930535122 -1.0
code = 0
uldcode = BELT

[cargo2]
pos = 0.782560933688 -6.95935304131 -1.691065782 4.0
code = 0
uldcode = BELT

[edit]edited values[/edit]

I will support your idea on the GPU, Mark. Give me a HU when you've posted over there.


You have different angles to me. I have 7.0 degrees for the front exit and service doors and 10 degrees for the rear exit and service doors.

Also. Does the BELT show up at the front/fwd cargo door on the -200/ADV for you? I get nothing happening there, but I do have the extra baggage cart showing. :( When I adjusted it in 3D, all I got was the blue (vertical) arrow, so I could only make those adjustments. I wonder if I making the distances relative to ground, or aircraft centre line, cause that happen. :-/

I also need to figure out the "custom" method for opening and closing the service doors. SHIFT+E then 2 opens the cockpit windows. :o

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2026. All Rights Reserved.