CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
C-130 X-perience >> C-130 X-perience - General >> Pitch Indicator https://www.captainsim.org/forum/csf.pl?num=1309885286 Message started by Joseph on Jul 5^th, 2011 at 5:01pm

Title: Pitch Indicator
Post by Joseph on Jul 5^th, 2011 at 5:01pm

Problem with the pitch indicator... the up and down pitch doesn't seem to register properply, very erratic. I also have the FS9 C-130 and the pictch indicator works perfectly.

Plesase, how can the problem be corrected or am I doing something wrong...seems to me it should work the same as the FS9 C-130. :-/
Back to top

Title: Re: Pitch Indicator
Post by Don-P1126 on Jul 7^th, 2011 at 12:45pm

I see the same thing... on the ADI needles do not move when making an ILS landing. I have to use the HSI Localizer needle and the small bar to the left on the ADI by the 5 dots. I bought weapon and use the HUD with my C-130J-30 for FSX and the needles work as advertised on there... The bars line up and the arrows align with the dots for ILS landings.
And before someone says I am not configured right, It works perfectly on my FS9 version C-130 and I have the cockpit set up identical for FSX.

Title: Re: Pitch Indicator
Post by Don-P1126 on Jul 11^th, 2011 at 10:45pm

Okay, interesting thing happened today, I was using SAITEK Multi panel for my Autopilot, I selected Nav and was following FlightSim Commander 9 and when I approached my runway, I selected the ILS frequency and then moved my Pilots Head selector to VOR/ILS when in Autopilot and the needles tracked the ILS for Glideslope and Locolizaer lock, then when I turned off the Autopilot to fly from decision height the needles FROZE.. no longer tracking the signal. Sure would be really nice to get this fixed, as it was talked about since 2009.