I worked on this and have posted it. This is the [LIGHTS] configuration for the 3D Redux on the CS 767-300, and may work for other 767 models. Also I think this works for the 762 models as well.

you would have to purchase the addon but the work is done here.

Make a backup of your old [LIGHTS] in the aircraft.CFG
Remove it from the aircraft.CFG
Replace with the new [LIGHTS] below
Cheers and Happy Holidays 8-)

[LIGHTS]        
light.0 =  9,  70,  -2, 5.2, fx_vclightwhi
light.1 = 10,  70,   2, 5.2, fx_vclightwhi
light.2 = 3, -28.6, -77.0, 3.8,   Fx_shockwave_navred
light.3 = 3, -28.6,  77.0, 3.8,   Fx_shockwave_navgre
light.4 = 2,  -30.1, -77.6, 4.0,   Fx_shockwave_strobe
light.5 = 2,  -30.1,  77.6, 4.0,   Fx_shockwave_strobe
light.6 = 5,  23, -9.0, -1.6,  Fx_shockwave_landing_light
light.7 = 5,  23,  9.0, -1.6,  Fx_shockwave_landing_light
light.8 = 6,  71, 0, -6.5,  Fx_shockwave_landing_light
light.9 = 1, 44.4, 0.4, 10.9, Fx_shockwave_beacon
light.10 = 1, 8.3, 0, -6.9, Fx_shockwave_beacon
light.11 = 5,  32, -8.4, -6.6,  cs767_edge
light.12 = 5,  32,  8.4, -6.6,  cs767_edge
light.13 = 7, -29, -58, 3,   cs767_sf
light.14 = 7, -29,  58, 3,   cs767_sf
light.15 = 8,  21, -19, 3,   cs767_edge
light.16 = 8,  21,  19, 3,   cs767_edge

that seems nice!
I willt try theses settings.
thanks

flo1981 wrote on Dec 21^st, 2010 at 7:11am:

that seems nice! I willt try theses settings. thanks

remember you need to have shockwave installed to get the effects :)

I've tried it but it has two errors.
1 - Raising the train have to turn off the lights because then they are fired under the fuselage of the plane.
2 - When you're in the air, with the weight of the plane's wings change position and the lights are below.
Kind regards
Frangollo