I have this problem only with the C-130H af Japan
Frames down to 1.5
Reinstall propack 1.3 and nothing happend


FSx SP2 W7


[fltsim.1]
title=CS C130Extra2 1
sim=C130
model=10

I change model 10 to model 9 and improved

I think is the smoke effect for model 10
please someone confirm this bug me


AMD Phemom quad core | 5GB DDR3 1600 | Nvidia Geforce8500gt | 21" LCD Monitor | 1 x 230GB HDD | Windows 7 Profession 64 bit

---

On my system, using the C-130H Japan AF, I'm getting 38 FPS (external view). This is at YMML and my add-on scenery is as follows:
Orbx FTX AU Australia SP3, Orbx AU YMML v2.0 (Melbourne International), Orbx AU YMAV (Avalon) and REX2. I don't think I would call it a bug.

What a your system specs? If you provide those, then we might be able to see why you are getting such low frame rates.

Mark

Markoz wrote on Nov 9^th, 2010 at 4:24pm:

On my system, using the C-130H Japan AF, I'm getting 38 FPS (external view). This is at YMML and my add-on scenery is as follows: Orbx FTX AU Australia SP3, Orbx AU YMML v2.0 (Melbourne International), Orbx AU YMAV (Avalon) and REX2. I don't think I would call it a bug. What a your system specs? If you provide those, then we might be able to see why you are getting such low frame rates. Mark

Hi tanks

Question ?
Have model 10 in

[fltsim.1]
title=CS C130Extra2 1
sim=C130
model=10

MACP wrote on Nov 9^th, 2010 at 10:18pm:

Hi tanks Question ? Have model 10 in [fltsim.1] title=CS C130Extra2 1 sim=C130 model=10

Yes it does:

[fltsim.1]
title=CS C130Extra2 1
sim=C130
model=10
panel=
sound=
texture=jap
kb_checklists=
kb_reference=
atc_id=JAF
atc_airline=JAF
atc_flight_number=
ui_manufacturer=Lockheed
ui_type="C-130H"
ui_variation="Japan AF"
ui_typerole="Multi-Engine TurboProp"
ui_createdby="Captain Sim"
description="'C-130 X-perience' Pro Pack v.1.3\n(c) 2008 Captain Sim www.captainsim.com"
flg="Japan"

I started the engines and left it sitting there for quite some time and there was lots of smoke around the engines and wings. I thought I must have had the throttles above idle, but I didn't. I also noticed that after I shut down the engines the smoke stayed for a while. I haven't had time to check if that happens with the other models.

I'll let you know what I find.

Mark

MACP wrote on Nov 9^th, 2010 at 3:59pm:

I have this problem only with the C-130H af Japan Frames down to 1.5 Reinstall propack 1.3 and nothing happend I think is the smoke effect for model 10 please someone confirm this bug me

I also have this problem with the JASDF C-130H.  It's horrible, smoke pours from the engines even though they are at idle.  The French C-130H works perfectly however and with all the other versions my frame rates rarely dip into the high 30's.  I've also noticed this same problem with any of the C-130H repaints I've tried from McPhat.  Strange! :-/

santafejay wrote on Nov 17^th, 2010 at 10:29pm:

MACP wrote on Nov 9th, 2010 at 3:59pm: I have this problem only with the C-130H af Japan Frames down to 1.5 Reinstall propack 1.3 and nothing happend I think is the smoke effect for model 10 please someone confirm this bug me I also have this problem with the JASDF C-130H.  It's horrible, smoke pours from the engines even though they are at idle.  The French C-130H works perfectly however and with all the other versions my frame rates rarely dip into the high 30's.  I've also noticed this same problem with any of the C-130H repaints I've tried from McPhat.  Strange! :-/

at some point the effect of smoke disappeared and the model worked perfectly.
As santafejay says is the model since I have tested with other textures and gives the same problem

I would say it's definitely in the model. My reasoning:

If you change this the aircraft.cfg from this
[fltsim.1]
title=CS C130Extra2 1
sim=C130
model=10

to this
[fltsim.1]
title=CS C130Extra2 1
sim=C130
model=9 (same as the French AF model)

Using model=10, I left mine sitting at the RAMP with the engines idling for 30 minutes and the smoke never cleared. When I changed it to model=9 and left it sitting at the RAMP with the engines idling for 30 minutes, no smoke showed up. I was still using the Japanese textures.

Mark