HI Mark: That is true; I agree. something is definately wrong with the pushback sequence of the 727. I do the same with my default or other addons Shift+P then 1 or2 depending whicch way you want to turn. But my 727-100 V2.4 only goes on straight lines as I've been saying.

...Now even after installing Robs' gauge the turn ratio is enormous,even after setting it at 90º
So there's still work to be done...Or we could just slew as you suggest?

I just checked again and the turning angle si wrong,even using Robs' gauge; As you say Mark

[quote]
[contact_points]
//point.0=1,   42.20,  0.00, -11.45, 1600, 0, 1.323, 45.00, 0.6, 1.30, 0.6, 4.0, 4.0, 0, 230.0, 270.0
point.0=1,   42.20,  0.00, -11.45, 1600, 0, 1.323, 70.00, 0.6, 1.30, 0.6, 4.0, 4.0, 0, 230.0, 270.0

Didn't make any difference,Robs' gauge isn't either; So I canonly guess that the code is completely wrong in the 727-100; Hope Lou has a look at this?