Hello folks,

i have no problems with starting engines at all.
0) Set all fuel levers to cut off
1) Baterries ON
2) External Power and Air ON
3) External Power on FE Panel ON.
4) Ess. Supply to External
5) Make sure Eng Bleeds and Bleeds crossfeeds are all ON.
6) Make sure AirPacks are OFF.
7) Make sure you have fed all engines with fuel, if not - open all fuel crossfeeds.
8) Ignitors to Low Pressure
9) Starter to Ground
10) And the main trick is to move fuel lever to Start position just before 20% N2.
The engine will make "bing" sound and it is up.

well, i think Constantijn above has better checklist  ::)

Pavel