| CAPTAIN SIM FORUM | |
|
757 Captain >> 757 version 1.x-2.x (FS9 ONLY) >> Viewpoint 2D panel
https://www.captainsim.org/forum/csf.pl?num=1260488949 Message started by que280 on Dec 10th, 2009 at 11:49pm |
|
|
Title: Viewpoint 2D panel Post by que280 on Dec 10th, 2009 at 11:49pm
I just bought 757 and have noticed that the viewpoint in the 2d panel is a bit off. For example, I found a object (catering truck) at the same heigth as the cockpit windows and the view forward in the 2d panel, the top of the truck is just below the bottom of the window, however if I change the view to the left,right,forward left, etc.. the view is about 2-3 feet below the top of the truck. Its almost as if the forward view is at a height of 10 ft and the others are at 5 ft.I tried to change the views in the aircraft.cfg and panel.cfg but I am having no luck. Can someone help if what I described isn't too confusing?
Thanks Quinn |
|
Title: Re: Viewpoint 2D panel Post by zlin142 on Dec 12th, 2009 at 5:16pm
Yeah, my problem is very similar. I would like to bring up the 'standard' views in VC, because now I can't see anything when I pressed the viewing angles on numpad. :(
I hope somebody can help us to solve these problems... |
|
Title: Re: Viewpoint 2D panel Post by B737200 on Dec 13th, 2009 at 7:23pm
Back-up your original panel.cfg and do this:
Go into the panel.cfg and in the [views] section find the entries describing the 2d views like VIEW_REAR_LEFT_WINDOWS etc. you have to change the eyepoint coordinates, these entries: VIEW_REAR_LEFT_EYE I copied the ones of the Forward view (the first view entered), I also changed the zoom value to 0.75. Now this will probably overlay the 2d views onto the VC, so delete the fixed window entries above the [views] section you were just editing. I had already deleted them so I'm not sure if they will be overlayed. MAKE SURE to leave the ones for the passenger window views there. They are described as PASS_RIGHT an PASS_LEFT. I'd send you my .cfg file but I'm not sure if its against the rules so unless I get permission I'd rather not, don't won't to get in trouble especially since its my first post. Hope this helps. |
|
Title: Re: Viewpoint 2D panel Post by zlin142 on Dec 15th, 2009 at 12:28am B737200 wrote on Dec 13th, 2009 at 7:23pm:
I don't think it's would affect to any copyrights, so please send me your panel.cfg by PM or by e-mail. Or seems to be easier if just copy here, isn't? ::) Many many thanks in advance for your kindly help! :) |
|
Title: Re: Viewpoint 2D panel Post by B737200 on Dec 15th, 2009 at 1:19pm
Well I suppose you are right, just so used to hearing copyright this and don't do this and don't do that that I got a bit worried. Not saying Copyrights aren't important, on the contrary, but at times it can get a bit hard to follow what the rules actually are.
I'll paste the stuff that way others can find it, if I send it to you they won't be able to, besides I've come across pasting on these forums. Ok so you have to change these entries: (These are the original ones, just making sure I'm clear on what to change) Fixed Window50=PASS_LEFT Fixed Window51=PASS_RIGHT Fixed Window52=45 View Fixed Window53=90 View Fixed Window54=180 View Fixed Window55=225 View Fixed Window56=270 View Fixed Window57=315 View [VIEWS] VIEW_FORWARD_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115 VIEW_FORWARD_ZOOM=0.75 VIEW_FORWARD_DIR=11.0,0.0,0.0 VIEW_FORWARD_EYE=0.0, 2.0, 0.0 VIEW_DOWN_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115 VIEW_DOWN_ZOOM=0.5 VIEW_DOWN_DIR=0.0,0.0,0.0 VIEW_DOWN_EYE=0,2,0 VIEW_REAR_LEFT_WINDOWS=12112 VIEW_REAR_LEFT_ZOOM=0.5 VIEW_REAR_LEFT_DIR=0.0,0.0,225.0 VIEW_REAR_LEFT_EYE=-0.5,0,1 VIEW_LEFT_WINDOWS=12113 VIEW_LEFT_ZOOM=0.5 VIEW_LEFT_DIR=0.0,0.0,270.0 VIEW_LEFT_EYE=-0.5,0,1 VIEW_RIGHT_WINDOWS=12110 VIEW_RIGHT_ZOOM=0.5 VIEW_RIGHT_DIR=0.0,0.0,90.0 VIEW_RIGHT_EYE=1.0,0,1 VIEW_REAR_RIGHT_WINDOWS=12110 VIEW_REAR_RIGHT_ZOOM=0.5 VIEW_REAR_RIGHT_DIR=0.0,0.0,90.0 VIEW_REAR_RIGHT_EYE=1.0,0,1 VIEW_REAR_WINDOWS=12111 VIEW_REAR_ZOOM=0.5 VIEW_REAR_DIR=-40.0,0.0,0.0 VIEW_REAR_EYE=1,0,1 VIEW_FORWARD_LEFT_WINDOWS=12114 VIEW_FORWARD_LEFT_ZOOM=0.5 VIEW_FORWARD_LEFT_DIR=0.0,0.0,315.0 VIEW_FORWARD_LEFT_EYE=-0.5,0,1 VIEW_FORWARD_RIGHT_WINDOWS=12109 VIEW_FORWARD_RIGHT_ZOOM=0.5 VIEW_FORWARD_RIGHT_DIR=0.0,0.0,45.0 VIEW_FORWARD_RIGHT_EYE=0.9,0,1 VIEW_FORWARD_UP_ZOOM=0.47 VIEW_FORWARD_UP_DIR=-46.0,0.0,50.0 VIEW_FORWARD_UP_EYE=0.15,1.9,0 VIEW_AUX_00_WINDOWS=12108 VIEW_AUX_00_ZOOM=0.5 VIEW_AUX_00_DIR=10.0, 0.0, 85.0 VIEW_AUX_00_EYE=0.5, 3.0, -27 VIEW_AUX_01_WINDOWS=12107 VIEW_AUX_01_ZOOM=0.5 VIEW_AUX_01_DIR=10.0, 0.0, 245.0 VIEW_AUX_01_EYE=-2.3, 2.0, -11 To This: Fixed Window50=PASS_LEFT Fixed Window51=PASS_RIGHT [VIEWS] VIEW_FORWARD_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115 VIEW_FORWARD_ZOOM=0.75 VIEW_FORWARD_DIR=11.0,0.0,0.0 VIEW_FORWARD_EYE=0.0, 2.0, 0.0 VIEW_DOWN_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115 VIEW_DOWN_ZOOM=0.5 VIEW_DOWN_DIR=0.0,0.0,0.0 VIEW_DOWN_EYE=0,2,0 VIEW_REAR_LEFT_WINDOWS=12112 VIEW_REAR_LEFT_ZOOM=0.75 VIEW_REAR_LEFT_DIR=0.0,0.0,225.0 VIEW_REAR_LEFT_EYE=0.0, 2.0, 0.0 VIEW_LEFT_WINDOWS=12113 VIEW_LEFT_ZOOM=0.75 VIEW_LEFT_DIR=0.0,0.0,270.0 VIEW_LEFT_EYE=0.0, 2.0, 0.0 VIEW_RIGHT_WINDOWS=12110 VIEW_RIGHT_ZOOM=0.75 VIEW_RIGHT_DIR=0.0,0.0,90.0 VIEW_RIGHT_EYE=0.0, 2.0, 0.0 VIEW_REAR_RIGHT_WINDOWS=12110 VIEW_REAR_RIGHT_ZOOM=0.75 VIEW_REAR_RIGHT_DIR=0.0,0.0,90.0 VIEW_REAR_RIGHT_EYE=0.0, 2.0, 0.0 VIEW_REAR_WINDOWS=12111 VIEW_REAR_ZOOM=0.75 VIEW_REAR_DIR=-40.0,0.0,0.0 VIEW_REAR_EYE=0.0, 2.0, 0.0 VIEW_FORWARD_LEFT_WINDOWS=12114 VIEW_FORWARD_LEFT_ZOOM=0.75 VIEW_FORWARD_LEFT_DIR=0.0,0.0,315.0 VIEW_FORWARD_LEFT_EYE=0.0, 2.0, 0.0 VIEW_FORWARD_RIGHT_WINDOWS=12109 VIEW_FORWARD_RIGHT_ZOOM=0.75 VIEW_FORWARD_RIGHT_DIR=0.0,0.0,45.0 VIEW_FORWARD_RIGHT_EYE=0.0, 2.0, 0.0 VIEW_FORWARD_UP_ZOOM=0.47 VIEW_FORWARD_UP_DIR=-46.0,0.0,50.0 VIEW_FORWARD_UP_EYE=0.15,1.9,0 VIEW_AUX_00_WINDOWS=12108 VIEW_AUX_00_ZOOM=0.5 VIEW_AUX_00_DIR=10.0, 0.0, 85.0 VIEW_AUX_00_EYE=0.5, 3.0, -27 VIEW_AUX_01_WINDOWS=12107 VIEW_AUX_01_ZOOM=0.5 VIEW_AUX_01_DIR=10.0, 0.0, 245.0 VIEW_AUX_01_EYE=-2.3, 2.0, -11 Let me know how it works out. |
|
Title: Re: Viewpoint 2D panel Post by zlin142 on Dec 15th, 2009 at 5:11pm B737200 wrote on Dec 15th, 2009 at 1:19pm:
I just arriving from a short test flight after panel.cfg editing, and I must say...ooohhh, yeahhh!!! [smiley=thumbsup.gif] This is what I want exactly! Superb! All my dreams come true, a big thanx to you for the help! 8-) |
|
CAPTAIN SIM FORUM » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2025. All Rights Reserved. |