I'm using the 767-300 v1.2 (never tried 1.1) and I have pretty much the same problems:


* When in 2d view, using the mouse to move the speed brake lever has no effect. The lever moves but the spoilers do not. Moving the lever in 3d view or using a key assignment works ok though. Switching back to 2d view however shows that the lever is always stuck in its original position.

* Using the key assignment for "Spoilers (arm)" has no effect - absolutely nothing happens. The lever does not even move.

* Putting the level in the armed position manually, either in 2d view or 3d view, does not work. The lever stays in the armed position but the spoilers then never extract when they should. I even tried setting it to exactly 39% as suggested but that makes no difference.

Any new ideas about this that I can try?

By the way, am I the only one who thinks the effect of the speed brakes is way too small? When cruising and extracting the speed brakes fully, the only thing that happens is a really really tiny change on the VSI. I've seen this mentioned for the 757 but not the 767.