CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
727 Captain >> 727 Captain >> Landing callouts https://www.captainsim.org/forum/csf.pl?num=1244470606 Message started by Coqui297 on Jun 8^th, 2009 at 2:16pm

Title: Landing callouts
Post by Coqui297 on Jun 8^th, 2009 at 2:16pm

Try to look for an answer in the manual and forums. In the 727 are there are landing callouts or not ? Thanks :-?

Title: Re: Landing callouts
Post by VFR Reviews on Jun 8^th, 2009 at 4:50pm

No, unfortunately.

Title: Re: Landing callouts
Post by delta dog on Mar 8^th, 2010 at 2:50pm

The only automated callout in the real a/c would be "minimums".
That would happen when the radio altimeter reads the selected altitude.
Some might say "DH" instead.

Title: Re: Landing callouts
Post by JETPILOT on Mar 14^th, 2010 at 8:39am

Coqui297 wrote on Jun 8^th, 2009 at 2:16pm:

Try to look for an answer in the manual and forums. In the �727 are there are landing callouts or not ? �Thanks :-?

Only some of the 727's would make the minimum callout. None of our planes did. Our company SOP was for the non flying pilot to call out 500 above minimums, 100 above minimums and minimum. When the �NFP called out minimum the flying pilot would either call out "landing" or "missed approach". It was also the NFP or engineers job to call out "approach lights in sight" or "runway in sight". The NFP or engineer would also call out airspeed corrections and altitude deviations, or "glideslope" or localiser" if there were deviations from either. Any of the fliogth crew could call out missed aproach if you had full scale deflections of either the localiser or glideslope.

It is all done old skool.

Title: Re: Landing callouts
Post by Dangerous Beans on Mar 16^th, 2010 at 7:07pm

Try these
http://library.avsim.net/download.php?DLID=84992
http://library.avsim.net/download.php?DLID=113484
There freeware gauges that will add altitude callouts to any plane you like.
There where originally made for FS9 but work fine with FSX

I hope the links are OK with the forum rules as there freeware �anyway.

Title: Re: Landing callouts
Post by Berlopez on Mar 17^th, 2010 at 7:30am

Great find Dangerous Beans: Can come very useful. We are still waiting and trying to come up with with a fix for the Don't Sink and Pull up calls that sund durng approach. Hope captainsim comes up with a fix for that soon...

Title: Re: Landing callouts
Post by Matt2218 on Mar 18^th, 2010 at 7:23pm

Coqui297 wrote on Jun 8^th, 2009 at 2:16pm:

Try to look for an answer in the manual and forums. In the �727 are there are landing callouts or not ? �Thanks :-?

I put together a set awhile back:

http://www.captainsim.org/yabb2/YaBB.pl?num=1263845648

Not authentic to the 727 but nice to have.

Title: Re: Landing callouts
Post by Berlopez on Mar 18^th, 2010 at 10:17pm

:) Matt thanks for making this...I have it on stand by... Waiting to the capts. to fix the don't sink and pull up calls during descend on approach...I saw a yutube video which I thnk you posted with this fix for the 727...very nice...Just the wrongly coded calls during approach,don't make sense...

I have been trying to put in the call_outs to CS 727-100 Fallowing the intructions...But fail everytime. As I pass 2500' in vc cockpit in 727 I don't hear the calls...Until I land. matt you say in your intructions that the gauge has to be added before [window02]; Since 727 doesn't have a 2D panel I'm a bit confused???
I have added it below in the panel.cfg where I can add gauge36 and the other consecutively...Is this correct?