right if you have the 3d redux copy all the different aircraft cfg out of your c-130 files and place them some were you can find them i just placed them in folder named after were i got them so i know which one goes were

now you have done that copy and paste this code in to you aircraft cfg under the light section replacing every thing that is in that part now save file and enjoy to activate the new lights use your leading edge light switch

[lights]
; X, Z, Y
light.1 =  6,  3.0, -8.10, -15.50,  cs130_taxi //right
light.2 =  6,  3.0, 8.10, -15.50,  cs130_taxi //left

light.3 = 8, 0.76, -66.80, -1.00, cs130_nav_red_flash
light.4 = 8, 0.77, 66.80, -1.00, cs130_nav_gre_flash

light.5 = 8, -58.25, 0, -2.10, cs130_nav_whi_double
light.6 = 8, 11.75, 0, -15.55, fx_navwhi

light.7 = 8, -58.25, 0, -2.10, cs130_nav_whi_flash_double
light.8 = 8, 11.75, 0, -15.55, cs130_nav_whi_flash

light.9 = 8, 0.76, -66.80, -1.00, cs130_navred
light.10 = 8, 0.77, 66.80, -1.00, cs130_navgre

light.11 = 8, 23.24, 0.00, -15.59, fx_beacon
light.12 = 8, 5.29, 0.00, -1.47, fx_beacon

light.13 = 8, -48.59, 0.00, 21.70, fx_beacon
light.14 = 8, 0.01, 0.01, 0.01, cs130_strobe

light.15 = 6, 3.50, 8.30, -14.10, fx_shockwave_landing_light_narrow_down
light.16 = 6, 3.50,-8.30, -14.10, fx_shockwave_landing_light_narrow_down

light.17 = 5, 2.76, -24.4, -3.5, fx_shockwave_landing_light
light.18 = 5, 2.76, 24.4, -3.5, fx_shockwave_landing_light