Hi.
I`ve noticed in ACE that you can enter a ULD weight in the box and then multiply it by using the arrows to load / unload.

My question is.......
What should this value be?

I`ve looked at http://baworldcargo.com/configs/BAWCconfigurations.pdf
and found this statement...................

The 757 is narrow-bodied, short to medium range aircraft which can
carry approximately 5 tonnes of cargo together with a full passenger
load. The aircraft has two underfloor holds consisting of five
compartments. The forward hold (compartments 1 & 2) is fitted with a
three-bin sled installation which is extendable from about 20“ behind
the forward hold door to the rear of the hold. The rear hold is divided
into two sections. The forward section (compartments 3 & 4) is fitted
with a two-bin sled installation and the rear section (compartment 5)
is a bulk compartment. Cargo and mail are loose loaded on this aircraft,
which does not carry Unit Load Devices.

As you can see this is NOT how ACE v.2 shows loading.
Can this be corrected?

Cheers
Eddie