Great job fsxpaul !!!

Thank you very much, you efforts are very appreciated.

Forget dthe last post, the second time I tested ISG integration works like a charm !!!

Thank you very much again

To activate LNAV:
1. Flight plan loaded into FMS
2. After take-off, both AP paddles up
3. AP heading select engaged (in down position)
4. Click 'LNAV' icon (turns light yellow when engaged)

Hi Paul thanks for replying. All works as it should. Thanks for your help.

The only thing is that all my icons now sit in bottom middle of my screen instead of the bottom left.

I have everything the same as in your post above including position=6 which I believe should put the icons in the bottom left corner.

Any suggestions?

Hello,

     Maybe you can help me. I installed everything and I have the fms, MCU, EFIS, and navigation displayed installed. I load up flight with the 737-200. Input my flight into the Smith FMS. I see my route come up on the Nav display. So all good. Do as you told in the instructions set to rwy heading. I take off and once above 1000ft turn on AP and heading selector. Then when I click on LNAV it does nothing. I can see the HDG bug switch to the correct to the right nav point very briefly but not even a second later the heading bug goes right back to the rwy heading. I appreciate any help or suggestions. As I've been wanting to fly this plane for a while now. I don't want to though seeing how there is no LNAV function. On a side rant don't understand why Captain Sim couldn't take the INS from their 727 and L1011 and make it compatible with the 737-200.

Thank You!!!

No it's FSX Steam. I followed your instruction guide too, double checked. I can see the route but for some reason the hdg bug flickers back to rwy hdg when I press L Nav. Auto pilot and heading select are turned on once I reach a thousand ft. When I go press LNAV the hdg bug flickers but goes back to rwy hdg.

Installing into the VC makes no difference. Do you have a functioning ISG installed in another aircraft?

So I just installed it into the default CRJ. Did a flight and sure enough it worked with the CRJ.Don't quite know what to do now.

You know what I figured out what it was I was trying to use LNAV in the MSU and don't realize you had an LNAV in the shift+2 menu. Once I clicked on that it started working. Thank you for this program had a blast being able to use LNAV on my flight.

Jenya77 wrote on Dec 19^th, 2017 at 7:29am:


Can you post your [Window01] section here to look for any errors?

Can we get an update of this for the P3D v4 release. It absolutely will not display the LNAV and FMC icons.

Hi everyone, I got this mod working on P3D v4

Use the modified intructions below:

1. Installation of Required Files
=================================
a) Place these 2 files into the ISG installation folder:
     Example: 'C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\ISG'
     'ISG_Control_CS737.xml'
     'B737_Ctrl_Cntr.xml' 

b) Place theses 2 files the into the 'ISG\Aircraft' folder:
     'B737-200.cfg'
     'B737-200.prf'


2. Panel.cfg Changes
====================
*** ALWAYS make a back-up first before modifying!!!

Add to the end of the [Window Titles] section:

WindowXX=Smiths FMS
WindowXX=Navigation Display
WindowXX=EFIS Control

Where 'XX' is the next available logical sequence number.
Example:
Window08=Smiths FMS
Window09=Navigation Display
Window10=EFIS Control


3. Add Icons
============
*** NOTE: If V-One is NOT installed ***

[Window01]
size_mm=36,144
background_color=1,1,1
position=6
visible=1
render_3d_window=0
type=special            //optional; keeps icons alway visable
zorder=99
ident=12101
gauge00=Captain_Sim.x737.anim!icons,0,24,36,120
gauge01=isg1!LNAV, 0,0,18,24
gauge02=isg1!FMS2_OPEN, 18,0,18,24


*** NOTE: With V-One installed ***

[Window01]
size_mm=36,168
background_color=1,1,1
position=6
visible=1
render_3d_window=0
type=special            //optional; keeps icons alway visable
zorder=99
ident=12101
gauge00=Captain_Sim.x737.anim!icons,0,48,36,120
gauge01=..\..\CS_B737-200\panel\V-One!v1_Icon, 0, 24, 36, 24
gauge02=isg1!LNAV, 0,0,18,24
gauge03=isg1!FMS2_OPEN, 18,0,18,24


4. Add New Windows
==================
*** NOTE: Change [WindowXX] to the same number sequence used in [Window Titles] section.

[WindowXX]
;Smiths FMS
Background_color=0,0,0
size_mm=501,386
window_size_ratio=1.000
position=8
visible=0
ident=4012
window_size= 0.220, 0.567
gauge00=isg1!SMITHS_FMS,0,0,501,386,B737-200
gauge01=..\ISG\!ISG_Control_CS737, 0,0,1,1
gauge02=isg1!Server, 1,1,1,1

[WindowXX]
;Navigation Display
Background_color=0,0,0
size_mm=188,300
window_size_ratio=1.000
position=0
visible=0
ident=4011
gauge00=isg1!HW_B737_ND,0,0,188,300,WN
gauge01=..\ISG\!B737_Ctrl_Cntr,173,283,10,15

[WindowXX]
;EFIS Control
Background_color=0,0,0
size_mm=140,130
window_size_ratio=1.000
position=0
visible=0
ident=4013
gauge00=isg1!HW_B737_EFIS_CNTR,0,0,140,130,WN
gauge01=..\ISG\!B737_Ctrl_Cntr,0,4,10,14


5. Add Navigation Display in Virtual Cockpit: Optional
======================================================
*** NOTE: Click-spot is center of radar screen ***

[VCockpit11]
size_mm=1024,1024
pixel_size=1024,1024
texture=$WXSP
background_color=0,0,0
gauge00=isg1!HW_B737_ND_NB,35,500,225,225,VC

6. Add this line under [VCockpit01]

[VCockpit01]
...
gaugeXX=ISG1!Server, 1,1,1,1