Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: [1]  Send TopicPrint
 25 707 Broken in p3D (Read 19514 times)
Michael Mannschreck
Full Member
*
Offline



Posts: 29
Location: USA
Joined: Jul 3rd, 2010
Gender: Male
707 Broken in p3D
May 12th, 2016 at 10:37am
Print Post  
when i try to load up my  707 in p3D i have Lines Going  threw the Model   is there anyway to fix this?

  
Back to top
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #1 - May 13th, 2016 at 9:50am
Print Post  
This can also occur in FSX. Try to restart the simulator or switch to another plane and then back, this should help.
  

 
Back to top
IP Logged
 
speck
Full Member
*
Offline



Posts: 190
Joined: Sep 8th, 2009
Re: 707 Broken in p3D
Reply #2 - May 14th, 2016 at 1:17pm
Print Post  
Hi these lines usually happen if you have the Virtual cabin enabled. Disable it and it will go away.
  

Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #3 - May 15th, 2016 at 2:00am
Print Post  
speck wrote on May 14th, 2016 at 1:17pm:
Hi these lines usually happen if you have the Virtual cabin enabled. Disable it and it will go away.

What I do when I have the problem, is checkmark Flight Deck Only, in the ACE, reload the 707, then uncheck it, reload the 707, and the lines usually go away for me after that.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
speck
Full Member
*
Offline



Posts: 190
Joined: Sep 8th, 2009
Re: 707 Broken in p3D
Reply #4 - May 15th, 2016 at 6:33pm
Print Post  
Thanks Mark, I'll try that for next time Smiley
  

Back to top
 
IP Logged
 
jbirdsal
Full Member
*
Offline



Posts: 7
Joined: Nov 26th, 2016
Re: 707 Broken in p3D
Reply #5 - Nov 26th, 2016 at 8:23pm
Print Post  
Along the P3D problem lines:

Anyone else had a problem with framerate atrophy in P3D V3.3 or 3.4?  Really wierd problem -- starts normal, then bleeds framerates, almost like a massive memory leak, with no VAS increase? 

Anyone else seeing this, and does anyone have any suggestions?

Cheers,

Jason
  
Back to top
 
IP Logged
 
maxs
Full Member
*
Offline



Posts: 31
Joined: Dec 7th, 2013
Re: 707 Broken in p3D
Reply #6 - Jan 2nd, 2017 at 4:57pm
Print Post  
jbirdsal wrote on Nov 26th, 2016 at 8:23pm:
Along the P3D problem lines:

Anyone else had a problem with framerate atrophy in P3D V3.3 or 3.4?  Really wierd problem -- starts normal, then bleeds framerates, almost like a massive memory leak, with no VAS increase? 

Anyone else seeing this, and does anyone have any suggestions?

Cheers,

Jason



I have exactly the same problem and no solution.  Sad
  

Regards and always happy landings,&&Max&&&&
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #7 - Jan 4th, 2017 at 1:34am
Print Post  
It happens to me too. I don't know why it happens, nor do I know of a fix for it, but I have to say that it looks to me like we will have to wait until Captain Sim release the 707 for P3D. Undecided
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
TheGoose
New Member
Offline



Posts: 1
Joined: Jul 27th, 2015
Gender: Male
Re: 707 Broken in p3D
Reply #8 - Jan 17th, 2017 at 8:08pm
Print Post  
Hi,

I just bought the 707 for 9.99 during the sale and its a great plane BUT the frames are horrible (VC only option is already selected).

C&D I have arround 40+ frames...after e.g. CRTL and E (just to start quick) the frames are dropping to down to 9/10fps

even at high altitude the frames are arround the same low value.  Cry

I am having a more or less top notch rig, means 4670k @ 4.5GHz and 1080 8GB + 24GB Ram.
Other planes like another company are running smooth as silk, the CS L1011 is running at 40+ fps.

Hope that someone can help.

Cheers
Goose
  
Back to top
 
IP Logged
 
JumpSeater
Full Member
*
Offline



Posts: 7
Joined: Apr 4th, 2013
Re: 707 Broken in P3D
Reply #9 - Jan 17th, 2017 at 11:09pm
Print Post  
There seems to be a memory leak with the 707 in P3D, or something going on to the point where it is really unflyable in P3D.  Frames begin to drop off in flight to a point where its near dead. Is there a plan to offer for sale an updated P3D version soon?  My  wallet is open for business here!  This is a really well done airplane and from a vintage jet perspective, an essential one for the hanger. Captain Sim, can you advise?

Cheers!
  
Back to top
 
IP Logged
 
GuyH
New Member
Offline



Posts: 2
Joined: Jan 18th, 2017
Re: 707 Broken in p3D
Reply #10 - Jan 18th, 2017 at 12:05pm
Print Post  
Hi guys,

Sorry to 'brake in' into this topic, but I am on the verge to buy the 707 but I just want to know if it's working correctly in P3D as I don't own FSX.

But I see here it has some issues with memory/FPS.
Is this a current problem with every P3D user here?
  
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #11 - Jan 19th, 2017 at 12:14am
Print Post  
While I can't say it's a problem for "everyone", it's worth considering that it could be a problem for you if you buy it for use in P3Dv3. You have to remember that it's made for FSX, and not P3D, so if you use it in P3D, you use it at your own risk. Undecided
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
GuyH
New Member
Offline



Posts: 2
Joined: Jan 18th, 2017
Re: 707 Broken in p3D
Reply #12 - Jan 19th, 2017 at 5:58am
Print Post  
Thanks for your response! I will make a mental note of it Wink
  
Back to top
 
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #13 - Feb 8th, 2017 at 5:57pm
Print Post  
Using P3D v3.4 for less than a week and one of my favorite plane - the 707 - make problems!  Sad

Have the same fps-problem - after loading the fps going down contiuous to unflyable.

If CS will Update the 707 to P3D v3 I would buy it immediately - also for EUR 60  Grin

So please?
  

 
Back to top
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #14 - Feb 10th, 2017 at 8:22pm
Print Post  
HA! FIXED in P3D v3.4! Oh yes my holly old lady, I will bring you up to P3D Skies now  Grin xD

BUT, there is also a bad news, but first the good one:

After the fix i've stable Frames between 60-70 in the VC and Interior (outside around the plane in my Desert-Testing Area a bit over 100).

And now the bad news: It's the doppler-gauge. So you have to look about an alternative (CIVA INS?). I used the doppler nav in combination with the GPS so that the 707 follows automatically an (self created) flightplan. Maybe a NAV/GPS Switch helps, but this I have to test it first.

So, here's the fix - it's VERY SIMPLE:

1. Open the panel.cfg of the 707
2. Go to [VCockpit10] Section and place a Semicolon ; before gauge nr. 27.

It should look like this:

;gauge27=Captain_Sim.x707.dns!main, 1,1

After this the 707 should be FULLY OPERATIONAL and ready to fly in P3D 3.4! YESS  Cheesy

A Second hint: Don't turn on the Weather Radar! This costs around 12 FPS.

I hope that Captain Sim will bring a fix for the doppler-gauge! This gauge can't be opened with FS Panel Studio (it says that it is an invalid gauge), I don't know why this gauge kills the 707 in P3D  Huh

  

 
Back to top
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #15 - Feb 12th, 2017 at 1:55am
Print Post  
Thank you very much for this info Mustang1977!  Smiley

I will eventually get to try it out, but I will wait until I get back from my overseas holiday in 4 weeks time! Grin
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #16 - Feb 12th, 2017 at 10:33am
Print Post  
No problem  Smiley

So you have to shorten your holiday for this  Grin xD
  

 
Back to top
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #17 - Feb 12th, 2017 at 11:30pm
Print Post  
Mustang1977 wrote on Feb 12th, 2017 at 10:33am:
So you have to shorten your holiday for this  Grin xD

That's easier said than done! Grin

Flying in FSX/FSX-SE/P3D is a bit hard at the moment, as I don't have a joystick to use with my laptop. I was hoping to buy one here, as the weight of my Logitech Extreme 3D Pro would have added extra weight to my luggage, and I was already very close to the limit, but I haven't found a single one yet. Sad

Also, I only have the Captain Sim products installed where they are designed to go, so I can help as best as I can for the main issues people have with them. Undecided
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #18 - Mar 11th, 2017 at 1:36am
Print Post  
Mustang1977 wrote on Feb 10th, 2017 at 8:22pm:
HA! FIXED in P3D v3.4! Oh yes my holly old lady, I will bring you up to P3D Skies now  Grin xD

BUT, there is also a bad news, but first the good one:

After the fix i've stable Frames between 60-70 in the VC and Interior (outside around the plane in my Desert-Testing Area a bit over 100).

And now the bad news: It's the doppler-gauge. So you have to look about an alternative (CIVA INS?). I used the doppler nav in combination with the GPS so that the 707 follows automatically an (self created) flightplan. Maybe a NAV/GPS Switch helps, but this I have to test it first.

So, here's the fix - it's VERY SIMPLE:

1. Open the panel.cfg of the 707
2. Go to [VCockpit10] Section and place a Semicolon ; before gauge nr. 27.

It should look like this:

;gauge27=Captain_Sim.x707.dns!main, 1,1

After this the 707 should be FULLY OPERATIONAL and ready to fly in P3D 3.4! YESS  Cheesy

A Second hint: Don't turn on the Weather Radar! This costs around 12 FPS.

I hope that Captain Sim will bring a fix for the doppler-gauge! This gauge can't be opened with FS Panel Studio (it says that it is an invalid gauge), I don't know why this gauge kills the 707 in P3D  Huh


It certainly seems to work, I did a partial flight - as in I took off, flew around for about 30 minutes, then ended the flight - and the fps remained at between 45 fps and 60 fps the whole time. In previous flights, within 30 minutes, the frame rate would have dropped to around 10fps, or less.

Thanks for figuring it out.  Smiley
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #19 - Mar 11th, 2017 at 8:55am
Print Post  
My pleasure  Smiley

But CS should made an up to date Version for the Doppler-Gauge in P3D.

But for the next few years - xD  Tongue - we should use an improved NAV/GPS Switch, so the 707 can follow normal Flightplans without problems. A good solution is to add the switch in the [Window00] Section:

gauge05=Beech_Baron!NAV GPS Switch,  26,661,27,64

The "gauge05" should be the next number.
  

 
Back to top
IP Logged
 
farman
Full Member
*
Offline



Posts: 28
Location: TRIESTE (ITALY)
Joined: Sep 13th, 2012
Gender: Male
Re: 707 Broken in p3D
Reply #20 - Mar 13th, 2017 at 11:08am
Print Post  
Hi, the advice about the Doppler is absolutely correct. But a second issue is arised. From the VC (func9) view, I see in the outside, "flashing" images of rectangles and the terrain too "flashes" - sorry, but I don't know how to explain it in a better way -. Anyone else has the same problem? it's a real pity, the 707 should be a P3D compatible software!
  
Back to top
GTalk  
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #21 - Mar 13th, 2017 at 11:42pm
Print Post  
I had that problem in FSX. I used to reload the 707 and they disappeared. I haven't tied this in P3Dv3 yet (being slack). Once I got to having the newer Graphics Cards, like the GTX 770, or even the GTX 470, I didn't have it happening in FSX any more.

No matter what, I still think we will need to wait for an update for the 707 to address this problem. Undecided
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
farman
Full Member
*
Offline



Posts: 28
Location: TRIESTE (ITALY)
Joined: Sep 13th, 2012
Gender: Male
Re: 707 Broken in p3D
Reply #22 - Mar 14th, 2017 at 4:07pm
Print Post  
Yes Mark, you're right. It's useless to force things. Let's wait (and hope, of course). Who knows, maybe some people in CaptainSim will read, before or after, our pleas.
  Thanks again, Mark
        Fulvio
  
Back to top
GTalk  
IP Logged
 
PascalP
Full Member
*
Offline



Posts: 14
Location: Paris
Joined: Aug 26th, 2015
Gender: Male
Re: 707 Broken in p3D
Reply #23 - Dec 8th, 2017 at 4:51pm
Print Post  
Bought it today and following Mustang advise I succeeded to have it in P3Dv3.
After a first flight I must say that I love this aircraft  Cheesy

Just a few issues:

  • No smoke for the engines
    Airspeed indicator sometimes reset to 0 and come back after a few seconds
    taxi lights not operating

Cheers
Pascal
  
Back to top
 
IP Logged
 
PascalP
Full Member
*
Offline



Posts: 14
Location: Paris
Joined: Aug 26th, 2015
Gender: Male
Re: 707 Broken in p3D
Reply #24 - Dec 20th, 2017 at 1:14pm
Print Post  
PascalP wrote on Dec 8th, 2017 at 4:51pm:
Just a few issues:

  • No smoke for the engines
    Airspeed indicator sometimes reset to 0 and come back after a few seconds
    taxi lights not operating


Taxi lights are ok  Wink
  
Back to top
 
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #25 - Dec 20th, 2017 at 7:21pm
Print Post  
PascalP wrote on Dec 8th, 2017 at 4:51pm:
No smoke for the engines

Have you checked if the Smokesystem is on (usually Hotkey "i")?

PascalP wrote on Dec 8th, 2017 at 4:51pm:
Airspeed indicator sometimes reset to 0 and come back after a few seconds

When does this happen? This could be a Temp-Problem (Pitot Heat?)
  

 
Back to top
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #26 - Dec 20th, 2017 at 7:26pm
Print Post  
I'am glad to hear that this great old lady is also working without problems at you  Smiley

Mustang1977 wrote on Dec 20th, 2017 at 7:21pm:
PascalP wrote on Dec 8th, 2017 at 4:51pm:
No smoke for the engines

Have you checked if the Smokesystem is on (usually Hotkey "i")?

PascalP wrote on Dec 8th, 2017 at 4:51pm:
Airspeed indicator sometimes reset to 0 and come back after a few seconds

When does this happen? This could be a Temp-Problem (Pitot Heat?)


I also recommend the V-One Panelmod for the 707 after a fresh install - this gives you much more experience  Smiley
  

 
Back to top
IP Logged
 
PascalP
Full Member
*
Offline



Posts: 14
Location: Paris
Joined: Aug 26th, 2015
Gender: Male
Re: 707 Broken in p3D
Reply #27 - Dec 29th, 2017 at 12:18am
Print Post  
Thanks Mustang for your answers  Smiley

I will check for the temp issue, it could be this.
For the smoke system I did not think of the I key as I thought it was based on the thrust power setting....

Cheers  Wink
Pascal

PS: I have nearly finish a linda action file for this lady and will post it soon...
  
Back to top
 
IP Logged
 
marcuscoull
Full Member
*
Offline



Posts: 6
Joined: Mar 21st, 2018
Re: 707 Broken in p3D
Reply #28 - Jul 22nd, 2018 at 8:05am
Print Post  
Just wondering.How have people put the CS 707 in Prepar3d.You can use the installer it wont recognize Prepar3d so do you just copy it from fsx to Prepar3d.Cheers.
  
Back to top
 
IP Logged
 
Mustang1977
Full Member
*
Offline



Posts: 150
Location: Austria
Joined: May 27th, 2014
Gender: Male
Re: 707 Broken in p3D
Reply #29 - Aug 1st, 2018 at 8:34pm
Print Post  
marcuscoull wrote on Jul 22nd, 2018 at 8:05am:
so do you just copy it from fsx to Prepar3d.

Yes, that's it. Manual integration  Cool - Runs without problems under P3D v3. Don't know if it runs with v4 too - not tested because I don't have v4.
  

 
Back to top
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #30 - Aug 2nd, 2018 at 12:43am
Print Post  
marcuscoull wrote on Jul 22nd, 2018 at 8:05am:
so do you just copy it from fsx to Prepar3d.Cheers.

That's one way to do it. The other way requires you to buy the Flightsim Estonia FSX to Prepar3D Migration Tool (which is worth buying (€10.04) if you don't own FSX/FSX-SE).
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
TransContair
New Member
Offline



Posts: 4
Location: Málaga
Joined: Sep 16th, 2015
Gender: Male
Re: 707 Broken in p3D
Reply #31 - Aug 2nd, 2018 at 4:34pm
Print Post  
Hi,
Does the 707 work correctly with that application?

Neftalí Delgado
  

Neftalí Delgado
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #32 - Aug 3rd, 2018 at 12:01am
Print Post  
I never actually used the migration tool to install the 707 into P3D, I only copied the files from FSX to P3Dv2/v3. Seeing as I bought the migration tool years ago, I can give it a try to install 707 into P3Dv3.4 (I doubt the 707 will work in P3Dv4).
Seeing as the migration tool will install the 707 in P3D, just like it would be installed in FSX, it's worth noting that to get it working without the problem of the fps droping over time, to do the fix that Mustang1977 provided here: https://www.captainsim.org/forum/csf.pl?num=1463049439/14#14
Sadly, that means you won't be able to do flights using dopller navigation, only using GPS, or INS navigation flights. Sad

I will do a test of installing the 707 into P3Dv3, using the migration tool, and let you know how it  goes.

Edited:
The migration tool worked fine for installing the 707 into P3Dv3, and the 707 worked like it should when I used it. I still had to comment out the DNS gauge in the panel.cfg to prevent the frame rates dropping from 50+ fps, down to ~7 fps (it only took a few minutes to drop down to that).
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
TransContair
New Member
Offline



Posts: 4
Location: Málaga
Joined: Sep 16th, 2015
Gender: Male
Re: 707 Broken in p3D
Reply #33 - Aug 11th, 2018 at 11:49am
Print Post  
ok thanks sir  ¡¡

Cool
  

Neftalí Delgado
Back to top
 
IP Logged
 
Steve S
New Member
Offline



Posts: 2
Joined: Jul 17th, 2018
Re: 707 Broken in p3D
Reply #34 - Dec 31st, 2018 at 5:40am
Print Post  
Man, wish CS would do a p3dv4 version of this plane n the 1011
  
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 707 Broken in p3D
Reply #35 - Jan 1st, 2019 at 1:12am
Print Post  
Sadly, it will take quite some time to see the 707 in P3Dv4. This is because Captain Sim are a small team, and it takes a lot of work to upgrade, and then refine it (fix bugs).
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 
Send TopicPrint
 
  « Board Index ‹ Board  ^Top