CAPTAIN SIM FORUM - CS 767 in P3D 2.5

(UTC)


	Welcome, Guest. Please Login or Register

CAPTAIN SIM FORUM › 767 Captain (FSX) › 767 Captain (FSX) › CS 767 in P3D 2.5

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

CS 767 in P3D 2.5 (Read 19570 times)

CptVHHH Full Member Offline Posts: 87 Joined: Jan 24^th, 2013	CS 767 in P3D 2.5 Sep 19^th, 2015 at 4:55am	Print Post
	Hi, I have been trying to install the 767 in P3D. I can install it, but the only issue i have is that the Speed Dial and Altitude Dial have 000 across them. I cant get them to the correct state where the Speed Dial says 200 and the Altitude Dial says 10000. I have tried reloading the aircraft as suggested in previous threads.I installed the 767 in FSX and FSX:Steam and i didn't have this issue. Haris. https://gyazo.com/133a546e6c07e771ef92fcbbafb7b7b0


	IP Logged

Capt. Bill Full Member Offline Posts: 103 Location: Taylor,MI Joined: Feb 24^th, 2010 Gender:	Re: CS 767 in P3D 2.5 Reply #1 - Sep 23^rd, 2015 at 3:22am	Print Post
	Did you use the Estonia Migration tool to convert it over.. That's how I got into my P3D originally & everything pretty much seemed to work fine..

	Capt. Bill
	IP Logged

CptVHHH Full Member Offline Posts: 87 Joined: Jan 24^th, 2013	Re: CS 767 in P3D 2.5 Reply #2 - Sep 23^rd, 2015 at 3:50am	Print Post
	Yes i did use the migration tool. The 767 works flawlessly in FSX:Steam but in P3D the install procedure is flawless, but the panel just wont load up correctly.


	IP Logged

khairlines Full Member Offline Posts: 5 Joined: Sep 29^th, 2015	Re: CS 767 in P3D 2.5 Reply #3 - Sep 30^th, 2015 at 1:32am	Print Post
	Hello, for me CS767 does work with P3D 2.5 but I have encountered, one problem. My CS767's fmc is blank it only shows the neon green boxes when you switch from page to page, but no words on the screen. Almost like it's missing textures... Thanks! KH


	IP Logged

khairlines Full Member Offline Posts: 5 Joined: Sep 29^th, 2015	Re: CS 767 in P3D 2.5 Reply #4 - Sep 30^th, 2015 at 1:33am	Print Post
	Anyway how do I fix this?


	IP Logged

jamestoneage Full Member Offline Posts: 7 Joined: Nov 4^th, 2015 Gender:	Re: CS 767 in P3D 2.5 Reply #5 - Nov 4^th, 2015 at 1:30am	Print Post
	Here is how to configure it to fully work in P3D v2.5: Install it normally, or just copy all the Captain Sim directories from FSX folder to P3D. Then after this go to your directory X:\Users\yourwindowsaccount\AppData\Roaming\Lockheed Martin\Prepar3D v2\ there you will find this file called dll.xml, open it with notepad and admin rights and in its end lines add the next code before this code line </SimBase.Document> click save, then almost everything should work, here the bleed air unit and ground power unit wont work. <Launch.Addon> <Name>Captain Sim 767 Menu</Name> <Disabled>False</Disabled> <Path>Captain_Sim\Captain_Sim.b767.menu.dll</Path> </Launch.Addon> Your installation must be registered in your windows register. *postimg.org/image/5y596wz4l/*


	IP Logged

Captain Sim 2 CS Team Offline Posts: 5564 Joined: Nov 8^th, 2005	Re: 767 on Windows 10 Reply #6 - Nov 4^th, 2015 at 9:49am	Print Post
	Off-Topic replies have been moved to this Topic.

	Support
	WWW Facebook YouTube IP Logged

iPetroSS Full Member Offline Posts: 50 Location: LGAV Joined: Oct 6^th, 2010 Gender:	P3D 2.5 Installation of 767 Reply #7 - May 30^th, 2015 at 3:01pm	Print Post
	Anyone has managed to install the 767 in P3D 2.5 ? I mean without the migration tool.... Peter

	Αέρας στα φτερά μας - Wind beneath our wings
	IP Logged

Ripcord Full Member Offline Posts: 16 Location: Houston KIWS Joined: Mar 30^th, 2013 Gender:	Re: P3D 2.5 Installation of 767 Reply #8 - Jun 17^th, 2015 at 4:41pm	Print Post
	iPetroSS wrote on May 30^th, 2015 at 3:01pm: Anyone has managed to install the 767 in P3D 2.5 ? I mean without the migration tool.... Peter OR even WITH the migration tool? I am trying to get the demo to work. I read that this CS767 works well in P3D v2 but I want to get the demo version working before I go all in on the purchase.


	IP Logged

rservice Beta Team Offline Posts: 373 Location: Canada Joined: Apr 17^th, 2006 Gender:	Re: P3D 2.5 Installation of 767 Reply #9 - Jun 18^th, 2015 at 11:25am	Print Post
	The demo is very limited as I recall in FSX. I have got the full version working OK in P3D v 2.5 using the migration tool. I believe that when you buy the package, the demo version must be deleted. Ron


	IP Logged

Ripcord Full Member Offline Posts: 16 Location: Houston KIWS Joined: Mar 30^th, 2013 Gender:	Re: P3D 2.5 Installation of 767 Reply #10 - Jun 22^nd, 2015 at 1:21am	Print Post
	Yes I really didn't get the point of the demo either, I must agree. Anyway, I took the plunge and it worked, with a little help from our Estonian friends. Now I need to learn to use the darn autopilot, but I can say that about the overwhelming majority of the planes I own.


	IP Logged

jscarano Full Member Offline Posts: 10 Joined: Jun 30^th, 2015	Re: P3D 2.5 Installation of 767 Reply #11 - Jun 30^th, 2015 at 11:59pm	Print Post
	How did you get it to work with the migration tool?


	IP Logged

Hightower Full Member Offline Posts: 23 Joined: May 31^st, 2014	Re: P3D 2.5 Installation of 767 Reply #12 - Jul 11^th, 2015 at 6:31pm	Print Post
	Is there any sort of update status of 767 V2.0? All i see is a wish list post about it. Is it in actual development? Well along in progress or just started? So badly needing a good 767 in prepar3d.


	IP Logged

jamestoneage Full Member Offline Posts: 7 Joined: Nov 4^th, 2015 Gender:	Re: P3D 2.5 Installation of 767 Reply #13 - Nov 4^th, 2015 at 1:19am	Print Post
	Here is how to configure it to fully work in P3D v2.5: Install it normally, or just copy all the Captain Sim directories from FSX folder to P3D. Then after this go to your directory X:\Users\yourwindowsaccount\AppData\Roaming\Lockheed Martin\Prepar3D v2\ there you will find this file called dll.xml, open it with notepad and admin rights and in its end lines add the next code before this code line </SimBase.Document> click save, then almost everything should work, here the bleed air unit and ground power unit wont work. <Launch.Addon> <Name>Captain Sim 767 Menu</Name> <Disabled>False</Disabled> <Path>Captain_Sim\Captain_Sim.b767.menu.dll</Path> </Launch.Addon> Your installation must be registered in your windows register. postimg.org/image/5y596wz4l/


	IP Logged

flyingman4life New Member Offline Posts: 4 Joined: Jan 12^th, 2016	Re: P3D 2.5 Installation of 767 Reply #14 - Jan 12^th, 2016 at 11:33pm	Print Post
	jamestoneage wrote on Nov 4^th, 2015 at 1:19am: Here is how to configure it to fully work in P3D v2.5: Install it normally, or just copy all the Captain Sim directories from FSX folder to P3D. Then after this go to your directory X:\Users\yourwindowsaccount\AppData\Roaming\Lockheed Martin\Prepar3D v2\ there you will find this file called dll.xml, open it with notepad and admin rights and in its end lines add the next code before this code line </SimBase.Document> click save, then almost everything should work, here the bleed air unit and ground power unit wont work. <Launch.Addon> <Name>Captain Sim 767 Menu</Name> <Disabled>False</Disabled> <Path>Captain_Sim\Captain_Sim.b767.menu.dll</Path> </Launch.Addon> Your installation must be registered in your windows register. postimg.org/image/5y596wz4l/ I bought the plane in the recent sale and have tried to manually get it working in p3dv3. its all installed etc but the screens are black, autopilot numbers not changing when dial turned. you say "Your installation must be registered in your windows register" How do I do this since I have manually installed it to FSX on the laptop then transfered the files to another computer with thanks


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board ^Top

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge