Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: [1]  Send TopicPrint
 25 767/757 Approach Advice (Read 25069 times)
trevm
Full Member
*
Offline


Still Flying

Posts: 26
Location: San Antonio, Texas
Joined: Oct 25th, 2012
Gender: Male
767/757 Approach Advice
Jul 14th, 2013 at 4:54am
Print Post  
Hey, guys.  I've had a problem lately coordinating the FSX default ATC flight plans with the flight plans I load into the CS 767 and 757, particularly the arrival paths.  It's gotten to the point where I don't bother using a STAR, rather I fly direct to the ILS point for my arrival runway (assigned by ATC).  To get to that point, I have to disengage LNAV and VNAV and fly with the heading select and altitude hold functions until ATC clears me for the ILS approach.  Then, when I attempt to engage the localizer hold, the aircraft won't lock on. Any tips?  I apologize if I am confusing, I can't very well understand either.





  

Boeing Flyers Unite!
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #1 - Jul 14th, 2013 at 2:43pm
Print Post  
My tip would be: Don't use ATC because it does not recognize SID's and STAR's. Shocked

I only use the ATC for GA flights now. Wink
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
wingclip
Full Member
*
Offline



Posts: 72
Location: Houston
Joined: Apr 21st, 2011
Gender: Male
Re: 767/757 Approach Advice
Reply #2 - Oct 3rd, 2013 at 10:27pm
Print Post  
trevm wrote on Jul 14th, 2013 at 4:54am:
Hey, guys.  I've had a problem lately coordinating the FSX default ATC flight plans with the flight plans I load into the CS 767 and 757, particularly the arrival paths.  It's gotten to the point where I don't bother using a STAR, rather I fly direct to the ILS point for my arrival runway (assigned by ATC).  To get to that point, I have to disengage LNAV and VNAV and fly with the heading select and altitude hold functions until ATC clears me for the ILS approach.  Then, when I attempt to engage the localizer hold, the aircraft won't lock on. Any tips?  I apologize if I am confusing, I can't very well understand either.


FWIW; There are several things that can cause a bad lock-on. If you're approaching the localizer by more than a 3 degree angle, if the attitude  of the plane is nose-up or down more than 3 degrees, and if your AGL altitude is too high, (important when it comes to FSX's POV), you may not get a lock.

For the FSX altitude 'thing', I started setting the plane to 2100 feet AGL everytime I do an ILS approach. It seems to keep FSX happy because since I've started doing that, it'll always 'see' me.

But then again, that's what I do for the Glide Slope catch. Still, I'm usually within 800' to 1000' of the 2100' AGL mark when I enter the localizer range.

So you may want to check that and of course, please disregard if you have. Smiley
  

Weapon for FSX / 737 Captain (737-200) / 767 Captain (767-300 Base Pack) / B-52 Driver / C-130 X-perience (FSX) / C-130 Extra Pack I
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #3 - Dec 29th, 2013 at 12:11am
Print Post  
Hi,

I´m sorry to "steal" this thread, but I am still only at 33 posts Undecided

I tried to approach KSEA 34R today (110.3 MHZ, 343 degrees heading). I dialed in the frequency in the ILS radio in good time, but it just failed to "catch" the localizer and GS..?

To check this RWY out, I made an perfect approach and landing with the 707, and that was with an even more odd pitch and angle of attach that I tried before with the 767.

I remember with the 757, that all three AP light switches came on, once it caught the localizer and GS. In this trial with the 767, only one was lit, the other two were  extinguished.

Am I missing something here?

BR,
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #4 - Dec 29th, 2013 at 3:14am
Print Post  
Quote:
I tried to approach KSEA 34R today (110.3 MHZ, 343 degrees heading). I dialed in the frequency in the ILS radio in good time, but it just failed to "catch" the localizer and GS..?
You should not need to dial in the ILS frequency, it is added to the NAV/RAD page of the CDU upon selection of the arrival runway.

If by chance you need to add it manually, you can dial it into the ILS Tuner on the Aft Pedestal. Do not enter it in the VOR Tuners (on the Glareshield) as they are not used for APP by the MCP (AP).
The format for adding the ILS frequency/heading to the NAV/RAD page of the CDU is XXX.XX/XXX (i.e. 110.10\343) in LSK4L.

In my image below, I selected ILS34R as the arrival runway, and the frequency/heading were automatically added to the NAV/RAD page of the CDU and to the ILS Tuner on the aft pedestal.

  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #5 - Dec 29th, 2013 at 6:58am
Print Post  
Thank you very much for the promt reply Smiley

I acually selected "34R" in the ARR section of the DEP/ARR page, not ILS34R. And by selecting just 34R, the ILS frequency did not change to 110.3, but remained at the frequency it had before. Thus I dialed it manually ( not in the VOR radios). However, I did not check the NAV/RAD page Undecided
So, in the ARR airports with an ILSxxx option, you should select this as the arrival? Or at least make sure it is in the NAV/RAD page afterwards?

BR,
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #6 - Dec 30th, 2013 at 3:06am
Print Post  
Under certain "missing T/D" or the "missing end of the route" problems, I always select the ILS Runway, then, if needed, I'll simply select the runway without any preceding info (RNAV, ILS, etc.). In this case, I would select ILS34R, then IF I find the T/D is missing or the route is incomplete, then I go back and select 34R as the arrival. I also usually add a STAR and insert any extra waypoints that are a part of the ILS Approach (from SimPlates ULTRA) to help me hook up with the ILS and GS for 34R.

NOTE: Because I already selected ILS34R as the arrival, the Frequency/Heading for the ILS is already entered into the CDU RAD/NAV page AND the ILS Tuner! So it saves having to enter it manually. Wink
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #7 - Dec 31st, 2013 at 8:17am
Print Post  
Well, I got it work Smiley
I don't know exactly what I did, maybe I got the STAR and TRANS right this time!
As soon as the right ILS frequency is automatically entered in the tuner in the first place, it will smoothly follow the glideslope down to the RWY.

But for some reason it landed approx. 50 meters to the right parallel to the RWY? Is this a bug in FSX?

Best Regards and thank you again for the advice,
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #8 - Dec 31st, 2013 at 8:55am
Print Post  
AndersCN wrote on Dec 31st, 2013 at 8:17am:
But for some reason it landed approx. 50 meters to the right parallel to the RWY? Is this a bug in FSX?
Hmm. Strange. I don't recall that happening to me at all. It might be that the navigation runway database has the threshold 50 metres right of where it really is (at least where it is in FSX). The biggest problem with the newer AIRACS, is that they are based on the real life ones, so things might change hear and there, but a runway 50 metres off, sounds wrong to me.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #9 - Jan 1st, 2014 at 8:33am
Print Post  
This is also the first time I land so far off the runway. I may try a few other airports with the 767 to see what it does there.

Best Regards,
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
fuzzy11
Full Member
*
Offline



Posts: 81
Joined: Aug 20th, 2011
Re: 767/757 Approach Advice
Reply #10 - Jan 1st, 2014 at 1:53pm
Print Post  
It might have something to do with the fact that FSX is 10+ years old now and the magnetic variation.  MVAR moves every year (it's about one degree every year), so not sure how the FSX chart people factor that into their nav databases.
  
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #11 - Jan 2nd, 2014 at 2:31am
Print Post  
Although that's true fuzzy11, I've never landed 50 metres off the runway yet (at least not using AUTOLAND).

Anders. Can you provide the entire route details please (departure runway, SID, Jetways/waypoints, STAR and arrival runway). I would like to test it to see the same thing happens to me when I fly it.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #12 - Jan 3rd, 2014 at 12:01pm
Print Post  
I´m away from my Sim PC now, I will return later with the entire flightplan from KLAX-KSEA that I used.

BR,
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #13 - Jan 3rd, 2014 at 4:03pm
Print Post  
I have just finished flying from KLAX to KSEA.

The route:
RW07R GMN4.EHF J65 RBL J1 BTG HAWKS3.BTG ILS34R.SONDR

The ILS/GS capture was fine and so was the approach and landing. My 767-300 landing right in the centre of the runway.

Here are some images of my approach and landing:







I even did a test landing with the Heading Preference Switch set to TRUE instead of NORM (in the red box of the next 3 images), just in case it might have been the cause of your problem, but it came straight in and still landed in the centre of the runway. Images of that landing:







Still not sure why you are landing 50 metres off the runway. Undecided
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #14 - Jan 3rd, 2014 at 8:32pm
Print Post  
Thank you very much for your help. I am really amazed with how much effort you put into this.

The route I was flying is this:

RW25R CASTA2.EHF EHF J5 LKV J67 BTG OLM.BTG RW34R

The Frequency 110.3 and CRS 343 now goes automatically in the ILS tuner.
Heading Preference Switch is in Norm.

But next step for me will be to fly the exact same route as you have used.

A few questions.
Do all three A/P´s lit (engage) when you "catch" the GS and Localizer?
In my case only the left one (L) lits as it does during the flight.

Do I have to dial the CRS (343 in this case) in the HDG of the MCP?

Best Regards,
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #15 - Jan 4th, 2014 at 2:18am
Print Post  
I'm curious about which Transition you used for ILS34R? I chose ILS34R.SONDR  to go with HAWKZ3.BTG because SONDR was the last waypoint for HAWKS3.BTG and it is also the first waypoint for the approach to ILS34R:



This meant there was no need to use VECTORS to capture the ILS/GS (or to use VECTORS to reach the first waypoint of the approach on ILS34R (which are CIDUG or SONDR):



Did you remove some waypoints from the STAR or APPROACH? Personally, I would probably wanted to remove the waypoints ARVAD and FOURT as well as VECTORS, so that my route was direct from LACEE to SONDR, which would mean there was no need to backtrack away from KSEA to be able to reach the TRANSITION waypoints of ILS34R.

Note: Failure to select the approach transition, means your route ends at the last waypoint of the STAR (VECTORS in this case).


Jan 4th, 2014 at 4:48am - I flew your route using IL34R.SONDR as my approach. After passing FOURT, I turned right to a heading of 185o, and flew that heading, while descending to, and holding 6000 feet (the SONDR altitude constraint of /6000A) until I was about 2nm beyond being parallel to SONDR, then I turned towards it. Once I was heading directly towards SONDR, I copied it into the scratchpad, then pasted it into LSK1L (CDU LEGS Page) and pressed EXEC. I then turned LNAV back on. After passing SONDR, I then descended to 5000 feet, and once I reached NEAL, I pressed the APP button. I immediately captured both the ILS and GS and continued on to land in the centre of runway ILS34R. It never deviated from the path. Straight in and right in the centre!


I forgot to answer the following questions. So here they are:

Quote:
Do all three A/P´s lit (engage) when you "catch" the GS and Localizer?
Not when I captur the ILS and GS, but once the LAND3 lights up, all three AP CMD buttons activate (illuminate).

Quote:
In my case only the left one (L) lits as it does during the flight.
I always use the centre (C) CMD button when flying the 767 (or 757) - It's just my preference. It should not matter whether you are using the left (L), centre (C) or right (R) CMD button to control the AP!

Quote:
Do I have to dial the CRS (343 in this case) in the HDG of the MCP?
No! Once the ILS Localizer is captured, the MCP should automatically set the heading to the ILS Localizer heading (343o in this case).

Hope this helps.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #16 - Jan 4th, 2014 at 1:04pm
Print Post  
I´m not sure how to insert pictures here, so I´ll explain;

The Star used is called OLM7 and the TRANS is called BTG. The last WayPoint before touchdown  is called CF34R, and is located 8 NM out from the RWY. I approach this CF34R with a HDG 034, then I click LOC and the aircraft makes a left turn to the CRS 343. Once the pink GS bug reaches the center, I click APP, and I then lower the landing gear.

Hope this helps.

Best Regards.
Anders

  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #17 - Jan 4th, 2014 at 3:53pm
Print Post  
I can see what you have done. You select 34R (not ILS34R) so there is no Transition needed for the approach. Selecting 34R gives you only the one waypoint, CF34R before RW34R.

When I did the route, I selected ILS34R, not 34R as the landing runway, so I had to choose a Transition for the approach. The Transition choices were CIDUG and SONDR, of which I selected SONDR.


In the above image, your runway selection is shown on the left side (in the red box) and my runway selection is shown on the right side (in the blue box).


This image shows that I have selected (SEL) STAR OLM8 TRANS BTG and APPROACH ILS34R, but have not yet selected a TRANS to go with the APPROACH.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #18 - Jan 4th, 2014 at 10:39pm
Print Post  
There are actually quite a few STARS and TRANS that I can´t find in my system. Such as OLM8 (I have OLM7) SONDR and HAWKS3. I haven´t changed my cycles from the original May05June01/11.

I then tried to make some other arrivals using other STARS and TRANS, deleting waypoints to smoothen up the approaches. But then I ended up with endless missing T/D issues Sad

Would it help to update the Navigraph base to a new Cycle?

BR,
Anders

  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #19 - Jan 5th, 2014 at 2:01am
Print Post  
Quote:
There are actually quite a few STARS and TRANS that I can´t find in my system. Such as OLM8 (I have OLM7) SONDR and HAWKS3. I haven´t changed my cycles from the original May05June01/11.
It can make it difficult, especially when a tutorial is done for an earlier AIRAC cycle than the one currently in use (if you happen to do an update/or update monthly). But I can use FSC9 or PFPX to create a route similar to a tutorial, by using the same jetways, but with slightly different waypoints, due to changes.

Quote:
I then tried to make some other arrivals using other STARS and TRANS, deleting waypoints to smoothen up the approaches. But then I ended up with endless missing T/D issues Sad
There is a trick to removing waypoints and still being able to get the T/D, but it can take a lot of messing around with to get it. What I do is take note of all the waypoints in the STAR/TRANS and the APPROACH/TRANS, and all speed and altitude constraints that go with them. Then I select a runway (as in 34R, NOT ILS34R) and then manually enter the waypoints and any speed/altitude constraints, leaving out the ones I don't want to use. In the case of KSEA 34R, it could mean leaving out some waypoints from the APPROACH/TRANS IF the heading is going to require a 180o turn. From memory, doing that allows me to have a T/D, but keeping that waypoint prior to the runway waypoint, (i.e. CF34R before RW34R).

Quote:
Would it help to update the Navigraph base to a new Cycle?
There are some differences between AIRAC cycle 1313 and 1105, but probably not a huge difference. As I said in a reply in the 777 Captain - Tech issues > FMC (incl LNAV, VNAV) forum:

Markoz wrote on Jan 1st, 2014 at 4:25am:
fuzzy11 wrote on Dec 31st, 2013 at 9:49pm:
How do you deal with having FSX nav data out of date versus FMC data being very up to date?
It does make it hard because things do change over time. For example, YMML SID DOSEL8 used to be DOSEL7, but the waypoints in both are the same. Another thing I have noticed is that waypoints do occasionally have name changes, so the name of a waypoint in AIRAC 1212, might be different in AIRAC 1312. One other thing that I think happens, is that when a waypoint name changes, it may not be that it is changed, but that it is removed and replaced with different waypoint, and at different LON/LAT coordinates, than the old ones.

So I wouldn't worry too much about changing it. At a cost of around €25 ($AU38) for 13 cycles ($AU2.93 per cycle), I consider it pretty cheap to update it monthly. If I was flying online for a Virtual Airline, it would make more sense to update it monthly, but I don't, so I have no real reason to update it, other than that I choose to do so.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #20 - Jan 5th, 2014 at 6:30am
Print Post  
Ok, there are some other things I will try out. Thank you for the advice.
I was just about to purchase the 767-200 package, but I think that I will have to leave that one out for now.

BR,
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Tim Capps
Senior Member
*
Offline


Defense Lawyer & US Navy
JAG (ret), Writer

Posts: 1070
Location: Southern Illinois
Joined: May 21st, 2009
Re: 767/757 Approach Advice
Reply #21 - Jan 5th, 2014 at 6:44am
Print Post  
I question the wisdom of updating cycles, but I do it. I am using a new service, the "A" one, not the "N" one. It is interesting to see a favorite old route throw a curve at you. (That's a baseball expression for a ball that is unexpectedly difficult to hit  Wink ). At least with that, I notice various airplanes seem to handle them differently (which shouldn't be).

Sometimes, I can't get an arrival and approach to even show up -- tonight SLVR VOR Z RWY 16 is a good example. I selected everything, but then it would not show up in LEGS. Only by selecting the vanilla RWY 16 approach could I get a runway showing, and I had to build everything around it with fixes and holds. Not a big deal, but obviously the product is not working as advertised. (The no TD trick worked for me, though, for the first time!)

If you're just flying around by yourself, there's really no reason to have them, like Mark said, unless you just want to see that current date in your FMC and see changes. Those aren't bad things -- I do it -- just not necessary things. And don't be afraid to modify the approach end of your route so it makes sense if you need to.

Also, I'm a firm believer that a computer is not much good without charts to look at and understand. You can find a lot free online, or get a year's subscription for about the price of a decent add-on airplane.
  

PC: i9 10900K @ 3.8 GHz | 32GB DDR4 3200 | 10GB RTX 3080 | 32†Asus TUF VG32VQ Curved Monitor | Samsung 2TB SSD HD | Win 10 Pro 64 - Flight Sim P3Dv5.2 |
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #22 - Jan 5th, 2014 at 7:20am
Print Post  
I bought AS NavDataPro to try it out for a few cycles (I still got Navigraph at the same time), but I wasn't happy with it and went back to using only Navigraph. I also think that in January 2013, Navigraph "expanded their coverage". It looked like the reason for doing it was due to NavDataPro, but that's a guess.

Quote:
And don't be afraid to modify the approach end of your route so it makes sense if you need to.
Because we are not flying in the real world, we can change the SID, STAR, APPROACH and TRANS to suit ourselves. Grin
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #23 - Jan 12th, 2014 at 6:53am
Print Post  
Well, I made a couple of short flights from my hometown EKCH to some airports in my region, ENGM, EDDH and EDDB. This time I selected ILSxxx as the arrival. At least it seemed to work each time with landing right in the middle of the RWY's Smiley
So, I don't know what happened in Seattle Shocked. I' ll try again, may I am just more skilled now..

But I noticed that some of the suggested STAR's in Rfinder.net really generate some tight and sharp arrivals that may be doable with a Cessna or a Spitfire, but hardly possible with a large Boeing.. Maybe that could have caused the misalignment before? What other flight planners would you recommend?

Best regards
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #24 - Jan 12th, 2014 at 3:48pm
Print Post  
As far as I know, Route Finder free does not provide a SID or STAR. It gives you a route between two airports, leaving you to add a SID and STAR. I think the reason for that is because depending on the winds, you cant be sure of which runway you will be using to take off from.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #25 - Jan 18th, 2014 at 7:54am
Print Post  
Hi,
Several flights now without an issue Smiley Now looking sharp in DX10  Smiley
Rfinder actually has some "some sort of" Stars and Sids. But I think sometimes they are mixed up with trans points.
Anyway, I normally find a solution and really enjoy the 767 now.
Thanks again very much for the advice.

Best Regards
Anders
  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #26 - Jan 18th, 2014 at 11:39am
Print Post  
I think rfinderfree looks for a high altitude route between the two airports you choose, and the first, and last, waypoints are along the chosen route, so you may find a SID that will end after the first waypoint, and a STAR that starts before the last waypoint, giving the appearance of including both.

Try asking for a route, like KSEA to PHNL, and you will end up with a like this:

KSEA (0.0nm) -DCT-> LOFAL (28.4nm) -V4-> DIGGN (35.1nm) -V4->
JAWBN (41.0nm) -V495-> WATTR (48.6nm) -V495-> JIGEB (55.1nm) -V495->
ORCUS (63.0nm) -J502-> YYJ (90.0nm) -J502-> ARRUE (122.8nm) -J502->
ROYST (172.7nm) -J502-> YZT (281.0nm) -J523-> YZP (506.2nm) -TR19->
FRIED (593.4nm) -J804R-> EEDEN (746.9nm) -J804R-> SNOUT (943.2nm) -J804R->
MDO (1113.6nm) -Q17-> WUXAN (1198.6nm) -Q17-> HOM (1273.5nm) -V321->
ELDOH (1293.0nm) -V321-> AUGEY (1319.4nm) -V321-> BATTY (1390.8nm) -V321->
OSKOE (1436.7nm) -V321-> AKN (1446.6nm) -V454-> EXIPE (1456.6nm) -V454->
DAJOB (1475.4nm) -V321-> EHM (1612.6nm) -G10-> SPY (1887.9nm) -G469->
CREMR (2007.5nm) -G469-> PIPPA (2088.5nm) -G469-> ONEIL (2492.1nm) -G469->
NYMPH (2656.5nm) -R220-> NUZAN (2854.5nm) -R220-> NRKEY (3005.7nm) -R220->
NIPPI (3055.5nm) -R220-> NOGAL (3385.5nm) -R220-> NUBDA (3715.7nm) -R220->
NANNO (3755.3nm) -R220-> NODAN (3878.5nm) -R220-> NANAC (4000.7nm) -OTR10->
KAGIS (4188.6nm) -A590-> ONASU (4301.5nm) -A590-> MOE (4369.9nm) -A590->
KARTA (4430.3nm) -A590-> YOSHI (4431.8nm) -Y85-> MAPDO (4468.8nm) -A339->
TAXON (4641.3nm) -A597-> ASEDA (4958.4nm) -A597-> MONPI (5211.6nm) -A597->
RICHH (5472.4nm) -A597-> REEDE (5623.1nm) -A597-> UNZ (5722.9nm) -R584->
JUNIE (5903.1nm) -R584-> GUNSS (5977.8nm) -R584-> TKK (6275.7nm) -R584->
BIRUQ (6625.7nm) -R584-> PNI (6655.7nm) -R584-> HAVNU (6685.6nm) -R584->
LOOIS (7052.1nm) -R584-> NDJ (7231.8nm) -R584-> CURCH (7292.4nm) -R584->
MAJ (7465.1nm) -R584-> MAZZA (8052.0nm) -R584-> MANRE (8605.6nm) -R584->
MCFLY (9159.0nm) -R584-> CHOKO (9270.2nm) -STAR-> PHNL (9445.7nm)

This happens because there are no airways between HQM and SEDAR, so it needs to find another way there.

Notice that the route length is 9445.7nm? That route consists of flying North to Alaska. Crossing the Northern Pacific to Japan. THEN turning East toward Hawaii. And as I said, that's just because there is no airway between HQM and SEDAR, or more to the point, rfinder does not know about airway C1418, and it might not be in the AIRAC you use either.

Seriously, If I was going to fly to PHNL from KSEA, it is only about 2400nm, and this is the route I would use:

KSEA HAROB4.HQM (or ELMAA.HQM) DIRECT TO (or C1418) SEDAR A331 ZIGIE MAGGI3.ZIGIE (this STAR can be used for any arrival runway) PHNL. So as you see, rfinder can give you a bit of a run around when it comes to a route. Wink

Although I use rfinder to help with a route, I still check it out in Flight Sim Commander 9 and will change it if, and where, I see necessary. For better route planing, Professional Flight Planner X is very good. I find PFPX is easier to find the next connecting airway, and I can still throw in a DIRECT TO when needed.

Anyway. It's all food for thought. We each choose our own ways of creating routes, so there's no set way to do it. Wink
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
AndersCN
Full Member
*
Offline



Posts: 80
Location: Copenhagen, Denmark
Joined: Dec 13th, 2011
Re: 767/757 Approach Advice
Reply #27 - Jan 18th, 2014 at 1:54pm
Print Post  
That is right, sometimes Rfinder sends you out on a silly long route. This is especially so over the oceans. However, if you roll back to an earlier cycle, such as 0904, you will get a more sensible 2350 NM from Seatlle to Honolulu. I have no idea why this is so, but this is what I do.
Travelling from Europe to North America you should enable NAT - North Atlantic Tracks. I sometimes forget that, and it suggests a route around the North Pole and Canada..

Best Regards
Anders

  

AMD Phenom II X6 1100T BE @ 3,9GHz&&Noctua NH-D14&&EVGA GTX 570&&4 GB GSkill 1600/7-8-7-24&&Asrock 990FX Extreme4&&850W XFX bronze&&CM HAF 912&&120 GB OCZ SSD, 250 GB Velociraptor, 1 TB WD Black&&Dell 24 inch 1920x1200&&Thrustmaster T1600M&&Windows 7/64 HP&&REX E Plus OD, FSG2010, FTXGlobal/Vector/O
Back to top
 
IP Logged
 
fowler
Full Member
*
Offline



Posts: 72
Joined: Oct 31st, 2009
Re: 767/757 Approach Advice
Reply #28 - Dec 10th, 2014 at 6:38pm
Print Post  
About ILS not shown properly : If you start a flight using MANUAL tuning of radionav (VOR/DME label on front panel) because you cannot use LNAV then don't forget to put it back to AUTO when you dont use this VOR anymore (you switched to LNAV most probably) this because if this switch is still on MANUAL you won't get ILS shown active on ND even if you loaded a STAR, freq correctly shown on NAV/RAD page and you switched the ND to ILS.
  
Back to top
 
IP Logged
 
LOU
Beta Team
*
Offline


727,707,747,757,767=
40years of Boeings

Posts: 1593
Location: Central PA, USA
Joined: Mar 3rd, 2010
Gender: Male
Re: 767/757 Approach Advice
Reply #29 - Jan 10th, 2015 at 5:09pm
Print Post  
Hello Anders,

You asked: A few questions.
Do all three A/P�s lit (engage) when you "catch" the GS and Localizer?
In my case only the left one (L) lits as it does during the flight.

Do I have to dial the CRS (343 in this case) in the HDG of the MCP?


It's been a while since I actually flew the 767, but if I remember correctly you must have the APP switch armed prior to arming additional autopilots required for autoland. The APP switch, when armed, also arms the previously engaged single autopilot for capture of the localizer and glide slope.

The left FCC is powered by the left AC & DC busses; the right FCC is powered by the right AC & DC busses; and the center FCC is normally powered by the center AC & DC busses. However, when the third autopilot is armed, the center AC bus transfers to the static inverter, and the center DC bus transfers to the hot battery bus. This feature provides three separate power sources for the three autopilots.

At 1,500 feet radio altitude, with LOC & G/S captured, the other autopilots engage hydraulically. and the ASA's indicate autoland capability. FLARE & ROLLOUT armed appear in the ADI's. Rudder authority is available to the autopilots for yaw control if an engine failure were to occur.

If you selected the proper ILS in the computer then the course will appear. The heading cursor will slew to the inbound course at LOC capture.

Lou
  

Processor: Intel Core i7-4770k @3.5Ghz Memory: 6Gb DDR3 1600mhz Video: NVIDIA GeForce GTX 680 Storage: 256Gb Samsung 840 Pro | 120Gb OCZ Agility 3 | WD Black 640Gb 7200rpm 55" Samsung LED - HDTV for monitor
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 767/757 Approach Advice
Reply #30 - Jan 11th, 2015 at 3:08am
Print Post  
One reason why the ILS may not become active is if the frequency is different in the AIRAC file to the one in FSX.

To check the frequency for the runway you are approaching/landing, got to the Menu > World > Map, move the map until the airport is in the centre and zoom in all the way, then click on the airport. When a box appears, select the airport from the list (usually it will show all nearby objects like VOR, NDB, intersections/fixes as well as the airport). On the left side will be all the info for the airport including the runways ILS frequencies & headings. Note. Sometimes the runways can differ from the AIRAC!

Once you have the info you need, return to you flight, open the CDU, click on the NAV RAD and see if the frequency matches. If it doesn't, you need to enter it manually in the LSK 4L, in this format xxx.xx\xxx (i.e. 110.10\054).

As for the AUTOLAND, the 3 A/P switches will become active (turn on) automatically once the ILS and GS are captured and the 767 is about 5nm from the runway threshold. You should not need to turn them on manually.
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 
Send TopicPrint
 
  « Board Index ‹ Board  ^Top