Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: 1 Send TopicPrint
727 Startup problem with Airhauler (Read 4141 times)
gandy
Senior Member
*
Offline



Posts: 266
Location: Near EGHH
Joined: Mar 25th, 2011
727 Startup problem with Airhauler
Jun 25th, 2011 at 3:04pm
Print Post  
I have a small well minor issue with my 727-200F when using airhauler, The problem is i cant keep the avionics running for more than ten minutes which is making it impossible to use the auto pilot and radios.

When starting a flight through airhauler it just cuts the fuel and switches the battery off and all other switches remain in the default state, Now when i fly a normal cold and dark flight i can start the aircraft with no issues and i never lose the avionics which makes me think im missing something when im restarting the 727 as im following the normal cold and dark start up i think.

Does anyone have any idea what im doing wrong or is there a way to change the default state to cold and dark for any flight instead of engines running ??
  

&&
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 727 Startup problem with Airhauler
Reply #1 - Jun 25th, 2011 at 3:25pm
Print Post  
Open the 727-100F/200F aircraft.cfg with notepad. Do a search for [electrical]. Once there add this line: electric_always_available = 1 below [electrical]. See below:


[electrical]
electric_always_available = 1
max_battery_voltage = 24.0
generator_alternator_voltage = 30.0
max_generator_alternator_amps = 400.0


Your avionics should now have power all the time.

Hope this helps.

Mark
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
gandy
Senior Member
*
Offline



Posts: 266
Location: Near EGHH
Joined: Mar 25th, 2011
Re: 727 Startup problem with Airhauler
Reply #2 - Jun 25th, 2011 at 3:34pm
Print Post  
Thanks Mark Smiley

p.s.

do you know how to change the default state of the 727's so no matter where i start a flight it will start cold and dark or if its possible to edit a file what one would i need to edit.
  

&&
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 727 Startup problem with Airhauler
Reply #3 - Jun 25th, 2011 at 3:59pm
Print Post  
Your default flight needs to be in a Cold-n-Dark state when you start FSX. I use the default C172 with everything (EXCEPT THE AVIONICS) turned off as my default FSX flight. Here is how (in case you don't know Wink):

Start FSX, select the C172 ans any airport of your choice and press Fly Now.
Once FSX starts, shut down the engine and turn everything, except the AVIONICS SWITCH, off.
Save the flight and place a TICK (checkmark) in the box beside "Make this the default flight".
That's it. It is now the default flight for FSX and every flight will start as Cold-n-Dark with the AVIONICS on.

The reason to leave the AVIONICS switch ON is so that they work from the start because there is no switch in the 727 to turn them ON or OFF.

Mark
  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
gandy
Senior Member
*
Offline



Posts: 266
Location: Near EGHH
Joined: Mar 25th, 2011
Re: 727 Startup problem with Airhauler
Reply #4 - Jun 25th, 2011 at 4:59pm
Print Post  
i have another question Smiley

Does the 727 support a full save state like the 757 as i know they say you should use a default aircraft but i dont fly them as i would rather go through the full check list on start up and use a fully shut down 727 or 757 as my default flight or would this not work due to limitations in fsx ?
  

&&
Back to top
 
IP Logged
 
Markoz
CS Team
*
Offline



Posts: 12349
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: 727 Startup problem with Airhauler
Reply #5 - Jun 26th, 2011 at 2:27am
Print Post  
Does the 727 support a full save state like the 757
No. Captain Sim do not provide a way to save a "panel state". I don't know which 757 you refer to, but it can't be the CS 757. Perhaps in the future, they will provide a way to save the 'panel state'.

i know they say you should use a default aircraft but i dont fly them as i would rather go through the full check list on start up and use a fully shut down
Having the default flight set as I described previously, does not mean you start FSX and load that particular flight before switching to the 727 (or whatever aircraft you choose). All it does is set a simple Cold-n-Dark setting as the norm.
So if you were, while on the FSX Start page, to switch the aircraft to the CS727-100F, then changed the airport to a bigger airport with a cargo ramp, then press FLY NOW, you will find that the CS727-100F is in a Cold-n-Dark panel state ayt the new airport and cargo ramp.

Flight1 offers an FSX Safe Start up flight which is recommended for advanced add-on aircraft. Although I haven't used it, I believe it is very similar to the default flight I suggested.

Hope this helps.

Mark

  

Mark Fletcher



PC: i7 10700K @3.8/5.1GHz | 64GB DDR4 3200 | 8GB RTX 2070 | 32" LCD Monitor | 1TB SSD & 2x2TB SSD | Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020
15.6" Gaming Laptop: i7 7700HQ | 32GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE/P3D4
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
 
  « Board Index ‹ Board  ^Top